| General |
| Operating voltage | 24 to 240 V DC and AC |
| Frequency | 50 to 60 Hz |
| Resistance monitoring range | 2 to 200 kOhm |
| Release delay | 0.5 to 10 s |
| Switching function | 1 change-over contact |
| Connection system | Screw connection |
| Adjustability | Analogue |
| Function | Fill or drain function selectable |
| Accessories | Wire and loop electrodes, identification plates, insert clips, cover caps |
| Certification | international certificates |
The Siemens monitoring relay type 3UG4501-1AW30 is an analogue level monitoring device from the SIRIUS 3UG4 series, designed for monitoring the level of conductive liquids in industrial applications. It provides protection against overflow, dry running or leakage by continuously measuring the electrical resistance between two electrodes installed in the liquid. The device is designed for use in systems with wide voltage supply and supports operating voltages of 24 to 240 V DC as well as 24 to 240 V AC at 50 to 60 Hz. Resistance monitoring is performed in the range of 2 to 200 kOhm, with sensitivity being analogically adjustable to accommodate different liquids with varying conductivities. The trip delay is adjustable from 0.5 to 10 seconds to compensate for short-term fluctuations such as wave movements. The device features a changeover contact and is equipped with screw terminals. Alternatively, models with spring-cage terminals are available, enabling quick, maintenance-free and vibration-resistant connections. The removable terminals allow device replacement without rewiring. The fill-up or drain function is selectable, enabling adaptation to different process requirements. In addition to level monitoring, other resistance sensors can be connected, such as photoresistors, temperature sensors or position transducers based on resistance. International certification enables worldwide use. As accessories, individually cuttable 2- and 3-pole wire electrodes as well as clamp electrodes are available, which can be installed from the top, bottom or side depending on mounting conditions. Additional accessories such as device identification plates, insert clips and cover caps are uniformly available for all relays in the series. The device is marked as a discontinued product; the preferred successor is model 3UG5501-1AW30.
Level monitoring is the primary application of this relay, with measurement performed via electrical resistance between two electrodes. The liquid must be conductive to enable reliable measurement. The
analog adjustability of sensitivity allows adaptation to different liquids with varying conductivities. The
trip delay of 0.5 to 10 seconds serves to filter short-term disturbances, such as those caused by wave movements in containers. The
fill-up or drain function can be selected according to application requirements, to either increase or decrease the liquid level. The
screw terminal technology enables a secure and stable connection of wires, with spring-cage terminal models also available. The
removable terminals facilitate device replacement without requiring rewiring. The
wide voltage supply of 24 to 240 V AC/DC ensures flexible integration into existing power supply systems. The
international certification enables use in various countries and regions. The
resistance monitoring range of 2 to 200 kOhm is sufficient for most industrial applications. The
1-changeover contact configuration provides a simple switching function for controlling pumps, valves or alarms. The
compatibility with other resistance sensors extends the application beyond level monitoring, for example for temperature or position monitoring. The
accessories such as wire and clamp electrodes allow flexible installation depending on container geometry and fill height. The
uniform accessories such as identification plates and cover caps are available for the entire SIRIUS 3UG4 series and support standardized installation.
Applications include monitoring liquid levels in tanks, containers or storage vessels in industry, particularly in systems handling conductive liquids such as coolant, oils or chemicals. The device is suitable for applications requiring automatic response to level fluctuations, for example for pump control or alarm triggering. The
functions and equipment in detail include analog sensitivity adjustment, selectable fill-up or drain function, adjustable trip delay, screw terminals and removable terminals. The
technology explained simply means that the device measures the electrical resistance between two electrodes, which changes with the liquid level. When a preset resistance value is reached, the changeover contact is activated. The
compatibility and accessories include use with wire and clamp electrodes, as well as the possibility to connect other resistance sensors. The
installation and mounting is performed depending on electrode type from the top, bottom or side, with electrodes being individually cuttable. The
operational advantages include easy adaptation to different liquids, flexible voltage supply, easy maintenance via removable terminals, and the ability to replace the device without rewiring. The
accessories such as device identification plates, insert clips and cover caps are standardized and facilitate installation and maintenance. The device is marked as
discontinued, with successor model 3UG5501-1AW30 recommended.