Further information for Siemens 3TH4244-0AP0 Auxiliary Contactor 4S 4Ö 230V AC
General
Degree of protection
weatherproof
Actuation
AC
Operating voltage
230/220 V
Frequency
50 Hz
Voltage at 60 Hz
276/264 V
Number of normally open contacts
4
Number of opening contacts
4
Connection system
Screw connection
Norm
DIN EN 50011
Model designation
44E
Approvals
IEC, UL/CSA
Positive mechanical interlock
The Siemens auxiliary contactor 3TH4244-0AP0 is an industrial switching contact for use in control circuits, specifically designed for signal multiplication at the output. It features AC operation and is rated for an operating voltage of 230/220 V at 50 Hz and 276/264 V at 60 Hz. The device complies with DIN EN 50011 and is classified as a 44E model, indicating a specific design and contact arrangement. It has four closing and four opening contacts (4 S + 4 Ö), connected via screw terminals. The contacts are equipped with positive mechanical interlock, making them suitable for safety applications, particularly in configurations meeting SUVA requirements.
Applications
This auxiliary contactor is used in industrial control systems to distribute a control signal to multiple parallel loads or circuits. It enables the simultaneous switching of up to ten auxiliary circuits, which is beneficial in complex automation systems. The weatherproof design makes it suitable for use in various environmental conditions, including industrial installations with increased mechanical or thermal stress.
Functions and Equipment in Detail
The contacts are fitted with a reliable connection technology ensuring a secure and durable connection. Standardized terminal markings according to DIN EN 50011 facilitate installation and maintenance. The positive mechanical interlock ensures the contact state remains correct even under mechanical stress or wear, which is crucial for safety-critical applications. The devices are designed for worldwide use and comply with international certifications such as IEC and UL/CSA.
Technology Explained Simply
Operation is via alternating current supplied through screw terminals. When voltage is applied, the contacts switch according to their function (closing or opening contacts), enabling signal transmission to multiple end devices. Signal multiplication is a key advantage, as it reduces the need for multiple individual switches or additional logic modules. The weatherproof design protects the device from environmental influences such as moisture or temperature fluctuations.
Compatibility and Accessories
The auxiliary contactor is available in various versions with 8 or 10 poles, with the 3TH4 series available in both AC and DC operation. Accessories such as overvoltage limiters, time delay units, and coupling elements are available for supplementary use depending on the application scenario. Examples of compatible accessories include the overvoltage limiter 3TX7402-3J for voltages of 127–240 VAC and 150–250 VDC, and the varistor 3TX7402-3K with cable spacing holder for AC 240–400 V. These components serve to protect and stabilize the entire circuit.
Mounting and Installation
Mounting is done via screw terminals, with connections marked according to DIN EN 50011. Installation requires no special tools or additional components, as the device is designed for direct use in control systems. The positive mechanical interlock simplifies maintenance and ensures reliable operation even with frequent use.
Operational Advantages
The high contact reliability and signal multiplication reduce control system complexity and decrease the number of required components. Worldwide certification allows use in various markets without additional modifications. The weatherproof design ensures long service life even under demanding operating conditions.