| General |
| Product type | Base switch |
| Housing material | Plastic |
| Housing width | 50 mm |
| Drive head | None |
| Switching function | 2Ö |
| Connector | M12 connector 4-pin |
| Channel 1 | an Ö |
| Channel 2 | At M12 socket on the right |
| Status indicator | LEDs |
| Status indicators | F-IN1, F-IN2, AS-i/FAULT |
| Operation lockout | 3D-coded |
| Safety approval | PL e, SIL 3 |
| Technology | ASIsafe |
| Bus system | AS-Interface |
The Siemens basic switch 3SF1244-1LC05-1BA2 is a mechanical safety switch from the SIRIUS series, specifically designed for position monitoring of movable protective devices in industrial applications. It features a plastic housing with a width of 50 mm and is delivered without an actuator head. The integrated ASIsafe electronics enable direct connection to the AS-Interface bus system, creating a compact and energy-efficient solution for safety applications. The low power consumption of the electronics reduces the load on the bus system and supports reliable signal transmission.
Applications
The switch is used in systems where the position of movable protective devices such as sliding doors, safety grilles, or covers must be monitored. It is suitable for applications in the manufacturing industry, packaging technology, or automation technology, where high safety integrity is required. The integrated ASIsafe function enables integration into AS-Interface networks, which are standard in many modern production environments.
Functions and Equipment in Detail
The switch features two micro-switches in normally open function (2NO), connected via a 4-pole M12 connector. Channel 1 is connected to the normally open position, Channel 2 to the M12 socket on the right. Status indication is provided by LEDs, which visually signal the current operating state. The 3D-coded actuation security ensures a high level of tamper protection, as only specially designated actuators can trigger the switch function. This prevents unintentional or deliberate manipulation of the device.
Technology Explained Simply
The integrated ASIsafe electronics enable secure communication over the AS-Interface bus system. The switches are approved for safety requirements according to PL e (Performance Level e) and SIL 3 (Safety Integrity Level 3), making them suitable for critical applications. AS-Interface technology transmits both control and diagnostic information over a single cable, simplifying installation and improving fault diagnosis. The LEDs indicate the status F-IN1, F-IN2, and AS-i/FAULT, allowing the operator to quickly determine whether the switch is functioning correctly or if a fault is present.
Compatibility and Accessories
The basic switch is delivered without an actuator head and can be combined with various actuator heads to realize different actuation types. Available accessories include actuator heads for toggle knobs, switches, roller plungers, angled roller levers, and replacement rollers in various diameters (e.g. 8 mm, 10 mm, 13 mm). These allow adaptation to specific mechanical requirements of the respective system. The accessories are specifically developed for the SIRIUS series 3SE51/52 and ensure safe and reliable actuation.
Mounting and Installation
The switch is mounted into the housing, with positioning and fastening to the respective protective device ensuring that the actuator is correctly triggered during the intended movement. Wiring is done via the 4-pole M12 connector, which provides a robust and weather-resistant connection. Installation does not require special tools, but correct alignment and fastening must ensure that the switch function operates reliably and without play.
Operational Advantages
The combination of compact design, integrated ASIsafe electronics, and high tamper protection makes the switch a reliable solution for safety applications. Direct connection to AS-Interface reduces the number of cables and connectors, simplifying maintenance. The LED display allows for quick visual inspection of the operating status, accelerating fault diagnosis. Approval for PL e and SIL 3 ensures compliance with high safety standards in critical systems.
Protection Rating and Environmental Conditions
Although the sources do not explicitly state a protection rating (e.g. IP67, IP69K) for this specific item, the SIRIUS product portfolio offers a range with high protection rating IP69K.
Accessories and Expansion Options
Available accessories include various actuator heads for different actuation types, including toggle knobs, switches, roller plungers, angled roller levers, and replacement rollers in various sizes. These allow individual adaptation to the mechanical requirements of the respective system. The accessories are specifically developed for the SIRIUS series 3SE51/52 and ensure safe and reliable actuation.
Safety Approvals
The switch is approved for safety requirements according to PL e (Performance Level e) and SIL 3 (Safety Integrity Level 3), making it suitable for critical applications. These approvals guarantee that the switch delivers high safety performance under defined conditions and can be used in systems with high demands on fault tolerance and reliability.
Application Scenarios
Typical application scenarios include monitoring sliding doors on machines, safety grilles in production systems, or covers on packaging machines. In all cases, the safe detection of the position of the movable device is crucial to ensure operator safety and the integrity of production processes. Direct connection to AS-Interface enables efficient integration into existing automation systems.