| General |
| Switching function | 2Ö/1S |
| Connector | M12 connector 4-pin |
| Safety class | PL e |
| SIL class | SIL 3 |
| Housing material | Metal |
| Drive head | None |
| Status indicator | LEDs |
| AS-Interface integration | ASIsafe integrated |
| Certification | EN 50041 |
| Operation coding | 3D-coded |
The Siemens basic switch type 3SF1114-1LA00-1BA1 is a mechanical safety switch from the SIRIUS series, specifically designed for position monitoring of movable protective devices in industrial applications. It features a metal housing and is delivered without an actuator head, allowing flexible combination with various actuation variants. The integrated ASIsafe electronics enable direct connection to the AS-Interface bus system, allowing the switches to be used in safety-critical installations. The switches are suitable for use in systems with high safety requirements according to PL e and SIL 3, making them particularly suitable for critical processes in manufacturing, automation, and machine building industries.
Applications
The switch is used in systems where the position of movable protective devices, such as protective grilles, sliding doors, or protective covers, must be monitored. It serves as a safety component to ensure that machines can only be operated when the protective device is in the correct, safe position. The direct connection to AS-Interface enables decentralized, bus-based communication, reducing the number of cables and simplifying installation. The switches are intended for use in environments with increased mechanical stress and high requirements for operational safety.
Functions and Equipment in Detail
The switch features snap-action contacts with the configuration 2NC/1NO, where channels 1 and 2 are each connected to the normally open contact. This enables parallel monitoring of multiple states or redundant execution of safety functions. The integrated ASIsafe electronics ensure low power consumption and reliable signal transmission over the AS-Interface bus system. Status indication is provided via LEDs, visually displaying the current state of the switch: F-IN1, F-IN2, and AS-i/FAULT. These indicators facilitate diagnosis and maintenance, as faults or operating states are directly visible on the device. The 3D-coded actuation ensures a high level of tamper protection, as only specially designated actuators can activate the switch.
Technology Explained Simply
The integrated ASIsafe electronics enable direct communication over the AS-Interface bus system, eliminating the need for additional control devices or relays. AS-Interface technology is a standard in industrial automation, enabling cost-effective and reliable data transmission. The switches are certified according to EN 50041, confirming compliance with standards for electrical safety switches in industrial systems. The use of metal as housing material ensures high mechanical stability and protection against external influences such as vibrations or mechanical stress. The switches are designed for use in environments with high demands on safety and reliability.
Compatibility and Accessories
The basic switch is delivered without an actuator head and can be combined with various actuator heads to adapt the actuation to the specific application. Available accessories include actuator heads for toggle switches, switches, position switches, and lever actuators in various designs, including plastic and stainless steel levers. The actuator heads are available for different shaft diameters such as 8 mm (hollow shaft) or 10 mm (solid shaft). Combining with suitable actuator heads enables flexible integration into existing machine constructions. Additional accessories such as separate actuators, connectors, and mounting accessories are also available to facilitate installation and maintenance.
Mounting and Installation
Mounting is performed on the respective machine or system, placing the switch at the location where the position of the movable protective device is to be monitored. Installation requires securing the switch to the housing or machine and connecting the M12 connector to the AS-Interface bus. The use of actuator heads requires precise mounting to ensure reliable actuation. The switches are designed for direct mounting on metallic or plastic-reinforced components. The integrated ASIsafe electronics require no additional power supply, as energy is transmitted via the AS-Interface bus.
Operational Advantages
The switch offers high reliability and safety through the integrated ASIsafe electronics and certification according to PL e and SIL 3. The direct connection to AS-Interface reduces the number of required cables and control devices, simplifying installation and reducing error rates. The LED indicators enable quick diagnosis of operating states and faults, reducing maintenance time. The 3D-coded actuation protects against unauthorized manipulation, increasing the safety of the system. The use of metal as housing material ensures high mechanical stability and durability, even under harsh operating conditions.