Safety switch with guard locking, with magnetic monitoring, locking force 1300 N, for SIMATIC ET200eco PN, 5 approach directions, spring-loaded locking, magnetic voltage 24 V DC, monitoring 1x door, monitoring 1x locking, wired with M12 connector, 8-pin, PIN1=11, PIN2=12, PIN3=41, PIN4=42, PIN5=nb, PIN6=nb PIN7=E1, PIN8=E2 Actuator 3SE5000-0AV0. /-0AW.. must be ordered separately. Connection accessories e.g. to the SIMATIC ET200eco PN-F: Y-cable 6ES7194-6KC00-0XA0 Cable 8-pin 3SX5601-3SV18 Mechanical safety switches SIRIUS 3SE5 for position monitoring of movable protective devices. They ensure that safety doors, covers or protective flaps/grilles are kept closed as long as a dangerous situation exists.The drive heads in screwless assembly can be rotated by 4x90 degrees. The actuator can be approached in 5 directions, one of which is from the front. The switching elements ensure very high contact reliability and can only be switched with a separately coded actuator, which ensures increased protection against manipulation. LEDs conveniently display the current status of the device. The devices are approved worldwide (IEC, UL). With the appropriate switch configuration, the highest safety requirements according to PL e or SIL 3 can be met.The devices are available with spring or magnetic force locking, in plastic with a locking force of 1300 N or metal with a locking force of 2300 N. An extensive range of 3D coded actuators can be ordered. Some variants are optionally available with an LED status display. The 3SF1 series with direct connection to the AS-Interface bus system rounds off the portfolio.The actuator is not included in the scope of delivery of the safety switches and must be ordered separately. Depending on the version, plugs and other connection accessories are available as accessories.Safety is a SIRIUS business.