Further information for Siemens 3SE53120SD11 safety position switch
General
Guard locking force
2600 N
Locking type
spring-loaded latching
Approach directions
5
Auxiliary unlocking
Front side
Magnet voltage
24 V
Actuator monitoring
2Ö/1S
Magnet monitoring
2Ö/1S
Switching function
2Ö/1S
Safety level
PL e, SIL 3
Approvals
IEC, UL
Drive head
screwless, 4x90° rotatable
Actuator compatibility
3D-coded, separately orderable
Accessories
plug, cable gland, connection cable
Series
SIRIUS 3SE5
Manufacturer
Siemens
Application
position monitoring of movable protective devices
Operating voltage
DC 24 V
LED indicator
The Siemens safety position switch type 3SE5312-0SD11 belongs to the SIRIUS 3SE5 series and is used for monitoring the position of movable safety devices in industrial applications. It ensures that safety doors, covers, or protective grilles remain securely closed during hazardous operating conditions. The device features a spring-loaded latching mechanism with a latching force of 2600 N and is designed for use in safety-critical systems. The switching elements can only be actuated with a separately coded actuator, providing enhanced protection against tampering. The drive heads are designed for screwless mounting and can be rotated in 4×90 degree increments, enabling five different actuator approach directions, including a front-facing one. Monitoring is performed for both the actuator and the magnet, each with the switching function 2NC/1NO. The magnet voltage is DC 24 V. The devices are globally approved (IEC, UL) and can meet safety requirements according to PL e or SIL 3 with appropriate configuration. An LED indicator displays the current status of the device.
Applications
This position switch is used in industrial automation, particularly in machine and plant engineering, where secure protection of movable safety devices is required. It is suitable for applications demanding high mechanical load capacity and reliability, such as in manufacturing, packaging technology, or metalworking. The latching force of 2600 N ensures that the safety device cannot be opened under mechanical pressure as long as the hazardous condition exists.
Functions and Equipment in Detail
The switch operates with a spring-loaded latching mechanism providing a latching force of 2600 N. The switching elements are designed to be activated only by a specially coded actuator, making tampering difficult. The drive heads are mounted without screws and can be rotated in four 90-degree steps, enabling five possible actuator approach directions, including a front-facing one. The auxiliary release is located at the front of the device. Monitoring is performed for both the actuator and the magnet, each with the switching function 2NC/1NO. The magnet voltage is DC 24 V. An LED indicator signals the operating status of the device.
Technology Explained Simply
The spring-loaded latching mechanism keeps the safety device closed using a mechanical spring force of 2600 N, ensuring it cannot be opened by external forces. The separate coding of the actuator prevents unauthorized activation of the switch, providing high protection against tampering. The five possible approach directions allow flexible installation and adaptation to different mechanical conditions. The LED indicator enables visual monitoring of the operating status.
Compatibility and Accessories
Available actuators include, for example, the radius actuator 3SE5000-0AV06 (right), the universal radius actuator 3SE5000-0AV05, the stainless steel actuator 3SE5000-0AW51, as well as various variants with vertical or horizontal mounting. Accessories include connectors such as the 3SY3127 device connector 4p M12 for M20x1.5 or the 3SX5100-1SS51 M12 connector 5-pin. Cable glands such as 3SX9926 and connection cables such as 3SX5601-2GA10 (8-pole, 10 m) complement the accessory range. The 3SF1 series offers direct connection to the AS-Interface bus system.
Mounting and Installation
Mounting is screwless, with the drive heads rotatable in 4×90 degree increments, allowing flexible orientation. Installation requires the separate purchase of a compatible actuator, which is attached to the device. Electrical connection is made via the appropriate connectors, with M12 connectors or other specific connectors possible depending on the accessory variant. The auxiliary release is located at the front of the device and can be used as needed.
Operational Advantages
The switch offers high mechanical load capacity due to the latching force of 2600 N and enhanced tamper protection through the separate coding of the actuator. The LED indicator enables quick visual inspection of the operating status. Global approval according to IEC and UL, as well as the ability to meet safety requirements PL e and SIL 3, makes the device suitable for demanding industrial applications. Screwless mounting and five possible approach directions increase installation flexibility.
Safety Requirements
With appropriate switch configuration, the highest safety requirements according to PL e (Performance Level e) and SIL 3 (Safety Integrity Level 3) can be met. The devices are globally approved according to IEC and UL, enabling use in various markets. Monitoring is performed for both the actuator and the magnet, each with the switching function 2NC/1NO, ensuring redundant safety monitoring. The magnet voltage is DC 24 V, which is a standard supply in industrial systems.
Accessories and Compatibility
Compatible accessories include various actuators such as the radius actuator 3SE5000-0AV06 (right), the universal radius actuator 3SE5000-0AV05, the stainless steel actuator 3SE5000-0AW51, as well as actuators with vertical or horizontal mounting. Connectors such as the 3SY3127 device connector 4p M12 for M20x1.5 or the 3SX5100-1SS51 M12 connector 5-pin are available. Cable glands such as 3SX9926 and connection cables such as 3SX5601-2GA10 (8-pole, 10 m) complement the accessory range. The 3SF1 series offers direct connection to the AS-Interface bus system.
Operational Safety and Approvals
The devices are globally approved according to IEC and UL. The switching elements can only be actuated with a separately coded actuator, providing enhanced protection against tampering. The LED indicator displays the current status of the device. The latching force is 2600 N, ensuring high mechanical load capacity. The magnet voltage is DC 24 V. Monitoring is performed for both the actuator and the magnet, each with the switching function 2NC/1NO. The drive heads are mounted without screws and are rotatable in 4×90 degree increments, enabling five possible actuator approach directions, including a front-facing one. The auxiliary release is located at the front of the device. The devices can meet safety requirements according to PL e or SIL 3 with appropriate configuration.