| General |
| Type of enclosure | Plastic |
| Length housing | 50 mm |
| Switching elements | 1S+2Ö |
| LED indicator | 2 |
| LED colours | yellow/green |
| Operating voltage | 115-230 V AC |
| Connection thread | 2x M20x1,5 |
| Approach directions | 5 |
| Drive head mounting | Screwless |
| Switching points | according to EN 50047 |
| Mounting | according to EN 50041 |
| Approvals | IEC, UL |
| Safety level | PL e, SIL 3 |
| Electronics | ASIsafe |
| Electricity consumption | low |
| Actuator | separate, to be ordered separately |
The Siemens safety position switch type 3SE5242-3QV40 belongs to the SIRIUS 3SE5 series and is used for monitoring the position of movable safety devices, such as doors, covers, or protective grilles in industrial installations. The device features a plastic housing with an overall length of 50 mm and is designed for use in safety-critical applications. The switching elements can only be actuated by a specially coded actuator, providing enhanced protection against tampering. The integrated ASIsafe electronics ensure low power consumption and support compliance with high safety requirements.
Safety position switch with a separate actuator enables precise and reliable monitoring of the position of movable components. The switching function is performed via creepage contacts with a configuration of 1S+2Ö, where the switching contacts are activated by a mechanical actuation mechanism. The drive heads are designed for screwless mounting and can be rotated in 4×90 degree increments, allowing five different actuator approach directions, including a front-facing direction. This provides flexibility during installation and adaptation to various mounting geometries.
Technology explained clearly – The switches are equipped with two LEDs in yellow and green to indicate the current operating status. This visual feedback simplifies diagnosis and maintenance. The operating voltage ranges from 115 to 230 V AC, enabling use in standard industrial power supplies. Device connections are made via two M20x1.5 threads, ensuring a secure and robust connection. The switching points and mounting comply with standards EN 50047 and EN 50041, ensuring adherence to European safety standards.
Compatibility and accessories – The device is globally approved and meets requirements according to IEC and UL. With the correct configuration, the highest safety requirements of PL e or SIL 3 can be achieved. Various accessories are available, including the lock insert 3SE5000-0AV08-1AA3, which provides additional protection against unauthorized actuation, and the cable gland 3SX9926 for the M20x1.5 connection. For connection to control systems, the device connector 3SY3127 with a 4-pole M12 connector is available, rated for 250 V and 4 A.
Mounting and installation – The screwless mounting of the drive heads simplifies installation and maintenance. The five possible actuator approach directions allow flexible adaptation to the specific mounting geometry. The M20x1.5 threaded connections are designed for a robust and durable connection. Mounting typically occurs on movable safety devices, with the switch positioned to accurately detect the desired position.
Advantages in operation – The integrated ASIsafe electronics ensure low power consumption, increasing efficiency. The LEDs provide clear visual feedback on the operating status, simplifying maintenance and diagnosis. High contact reliability and tamper protection via the separate, coded actuator enhance system reliability and safety. Compliance with international standards and approvals enables worldwide use in various industrial sectors.
The described accessories are optionally available and serve to adapt to specific application requirements.
Note: Batteries are not included in the delivery scope.