Siemens 3SE52121RV40, EAN: 4011209862692

Siemens 3SE5212-1RV40 limit switch 1S1Ö grey/green DC 24 V

Industrial Material > Control devices / Pilot devices > Limit switches, mechanical

Siemens 3SE5212-1RV40 limit switch 1S1Ö grey/green DC 24 V

Lieske Part No. 127992
Mfg Part No 3SE52121RV40
EAN-Code 4011209862692
Manufacturer Siemens
Here only 101,84 EUR
121,19 EUR incl. VAT

Further information for Siemens 3SE5212-1RV40 limit switch 1S1Ö grey/green DC 24 V

General
Type of enclosureMetal
Housing width31 mm
ActuatorApart
Switching elements1S+1Ö
Switching typeCreepage contacts
LED indicator2x
LED coloursyellow/green
Operating voltage24 V DC
Approach directions5
Drive headM20x1,5
Drive head materialPlastic
Mounting methodScrewless
ElectronicsASIsafe
Safety requirementsPL e, SIL 3
ApprovalsIEC, UL
StandardsEN 50047, EN 50041
The Siemens safety position switch type 3SE5212-1RV40 belongs to the SIRIUS 3SE5 series and is used for position monitoring of movable safety devices such as doors, covers, or protective grilles in industrial applications. The switching function is performed via microswitches with a switching configuration of 1 normally closed contact and 1 normally open contact (1S+1Oe). The integrated ASIsafe electronics enable safe and reliable signal transmission, while keeping power consumption low. The operating voltage is DC 24 V, and the switch is equipped with two LEDs that indicate the current operating status using the colors yellow and green.

Applications

The position switch is designed for use in safety-critical installations, particularly in the machine and plant construction industry. It monitors the position of movable parts and ensures that machines can only be operated when safety devices are correctly closed. The switching points and mounting comply with standards EN 50047 and EN 50041, ensuring standardized and secure installation. The devices are globally approved and meet the requirements of IEC and UL standards.

Functions and Equipment in Detail

The switching elements of the switch are designed to operate only with a specially coded, separate actuator. This ensures enhanced protection against manipulation, preventing unauthorized or accidental actuation. The drive heads are designed for screwless mounting and can be rotated in 4×90 degree increments, allowing five different actuation directions, including a front-facing direction. The LED display enables visual monitoring of the switch status, with the colors yellow and green indicating the respective status.

Technology Explained Simply

The integrated ASIsafe electronics ensure safe signal transmission and are designed for use in safety-relevant applications. The switching function is performed via microswitches, which provide high contact reliability. The operating voltage of DC 24 V is typical for industrial control systems and allows easy integration into existing installations. The low power consumption of the electronics reduces the load on power supplies and supports energy-efficient operation.

Compatibility and Accessories

The switch is equipped with a plastic M20x1.5 head suitable for mounting on various machine parts. Various accessories are available, including the lock insert 3SE5000-0AV08-1AA3, which provides additional protection against unauthorized access, and the 5-pole device plug 3SY3128 for a secure electrical connection. The cable gland 3SX9926 enables a secure and waterproof connection between the cable and the switch. Other variants of the SIRIUS series, such as the 3SE5232-1RV40, offer similar functions with minor differences in equipment.

Mounting and Installation

Mounting is performed using screwless drive heads that can be rotated in 4×90 degree increments. This allows flexible alignment of the switch on the machine. Mounting complies with standards EN 50047 and EN 50041, ensuring standardized and secure installation. Wiring is done via the 5-pole plug or the cable gland, depending on the selected accessory. Installation requires no special tools, as mounting is done without screws.

Advantages in Operation

The switch offers high reliability and contact security, which are required for safety-critical applications. The integrated LED display allows for quick visual inspection of the operating status. The low power consumption of the ASIsafe electronics reduces the load on power supplies. Global approval according to IEC and UL, as well as compliance with safety requirements for PL e and SIL 3, makes the switch suitable for international applications. The modular design allows flexible adaptation to various requirements by selecting appropriate accessories.

Safety Requirements

With the appropriate switch configuration, the highest safety requirements according to PL e (Performance Level e) and SIL 3 (Safety Integrity Level 3) can be met. These classifications are relevant for applications in industrial automation, where high availability and reliability of safety functions are required. The devices are designed for use in safety-critical systems and support compliance with relevant standards and directives.

Accessories and Extensions

In addition to the base device, various accessories are available that extend functionality. The lock insert 3SE5000-0AV08-1AA3 provides additional protection against unauthorized access. The 5-pole device plug 3SY3128 enables a secure electrical connection. The cable gland 3SX9926 ensures a waterproof and mechanically stable cable connection. Other variants such as the 3SE5232-1RV40 offer similar functions with minor differences in equipment.

Compatibility with Other Systems

The SIRIUS 3SE5 series is part of a comprehensive product range that also includes the 3SF1 series, which allows direct connection to the AS-Interface bus system. This enables integrated control and monitoring within an industrial network. Compatibility with AS-Interface systems facilitates integration into existing automation environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/127992
qrcode für Siemens 3SE5212-1RV40 limit switch 1S1Ö grey/green DC 24 V