| General |
| Type of enclosure | Metal |
| Height | 40 mm |
| Norm | DIN EN 50041 |
| Connection | M20 x 1.5 |
| Switching function | 1S/2Ö |
| Switching type | creepage contacts |
| Operating voltage | AC 230 V |
| Status indicator | 2 LEDs yellow/green |
| Safety rating | PL e |
| Security integrity level | SIL 3 |
| Approval | IEC, UL |
| Electronics | ASIsafe |
The Siemens basic switch 3SE5112-3KA00 is a mechanical safety switch of the SIRIUS 3SE5 series, specifically designed for position and location detection of machine parts as well as position monitoring of protective devices in industrial automation. The device features a metal housing with a height of 40 mm, manufactured according to DIN EN 50041, and serves as a base element for modular position switch configurations. The switch configuration enables the fulfillment of high safety requirements, including safety performance level PL e and safety integrity level SIL 3, when appropriate components are combined.
Applications
The basic switch is used in industrial applications where reliable and safe detection of positions or movements is required, for example in manufacturing automation, presses, conveyor systems, or packaging technology. The modular design allows flexible adaptation to different requirements, with the housing serving as a base for various actuator heads and switching functions. The switching points and mounting comply with standards EN 50047 and EN 50041, ensuring standardized installation and integration into existing systems.
Functions and Equipment in Detail
The device features two LED indicators in yellow and green, visually signaling the current operating status of the switch. The LEDs serve as status indicators and facilitate diagnosis and maintenance. The switching function is performed via snap-action contacts with a configuration of 1 normally closed contact and 2 normally open contacts (1S/2Ö), enabling flexible wiring in control systems. The integrated ASIsafe electronics ensure low power consumption and support use in safety-critical applications. The device connection point is designed as M20 x 1.5, enabling secure and standardized connection with cable glands.
Technology Explained Simply
The basic switch operates mechanically and is actuated by an external actuator head mounted on the housing. The switching function is triggered by the movement of the actuator head, causing the contacts to close or open accordingly. The snap-action contacts ensure that switching operations occur smoothly and without mechanical stress, increasing the switch’s service life. The ASIsafe electronics are integrated into the device and enable communication via the AS-Interface bus system, allowing the device to be integrated into higher-level control systems. Global certification according to IEC and UL ensures suitability for use in various markets.
Compatibility and Accessories
The basic switch is compatible with a wide range of actuator heads available for the position switch series 3SE51/52, for example with metal or stainless steel levers as well as angled roller levers. Additional accessories such as cable glands (e.g. 3SX9926), device connectors (e.g. 3SY3128), and mounting accessories (e.g. base plate 3SY3027) are available to facilitate installation and wiring. The modular construction allows individual adaptation to specific application requirements.
Mounting and Installation
Mounting is carried out according to standards EN 50047 and EN 50041, with standardized mounting screws and holes. The quick-connect technology reduces connection times and simplifies installation. Wiring is done via the M20 x 1.5 connection, and a suitable cable gland is recommended to ensure a secure and weather-resistant connection. Mounting of an actuator head is required to activate the switching function.
Operational Advantages
The basic switch offers high mechanical robustness due to the metal housing and a long service life due to the snap-action contacts. The LED indicators enable quick status monitoring, and the integrated ASIsafe electronics support integration into safety-relevant control systems. The modular design reduces inventory requirements, as a small number of base units can be combined with various actuator heads and functions to cover a wide range of application scenarios. Global certification according to IEC and UL ensures suitability for international projects.