| General |
| Construction type housing | 40 mm |
| Switching function | 1S/1Ö |
| Contact type | make-and-break contacts |
| Lever type | Roller lever |
| Lever material | metal lever with plastic roller |
| Roll diameter | 22 mm |
| Connection thread | M20 x 1.5 |
| Status indicator | LED |
| Compliance with standards | DIN EN 50041, EN 50047 |
| Approvals | IEC, UL |
| Safety level | PL e, SIL 3 (depending on configuration) |
| Electronics | ASIsafe electronics |
| Electricity consumption | low |
The Siemens position switch type 3SE5112-0CE01 belongs to the SIRIUS series and is a mechanical end switch with a metal housing in form 40 mm. It is used for position and location detection of machine parts as well as for monitoring the position of safety devices in industrial applications. The device features a roller lever, consisting of a metal lever and a plastic roller with a diameter of 22 mm, and is equipped with snap-action contacts enabling a switching function of 1 normally open and 1 normally closed contact (1S/1Ö). The switching function is triggered by mechanical actuation of the lever, with the contacts switching abruptly upon actuation.
Applications
The position switch is designed for use in industrial automation technology, particularly in machine and plant engineering, where precise detection of motion states or switching conditions is required. It is used, for example, to monitor sliding doors, swing arms, lifting cylinders, or other movable components. Compliance with standards DIN EN 50041 and EN 50047 for switching points and mounting ensures standardized installation and interoperability with other components.
Functions and Equipment in Detail
The device is equipped with an LED status indicator that visually signals the current switching state. The quick-connect technology reduces installation and maintenance times, as no additional tools are required for wiring. Connection is made via a device connection with a thread M20 x 1.5, enabling a secure and mechanically stable connection. The integrated ASIsafe electronics ensure low power consumption and support connection to the AS-Interface bus system, enabling decentralized control and diagnostics.
Technology Explained Simply
The switch operates mechanically: when the plastic roller is touched by a moving component, the lever is actuated, causing the contacts to switch. The snap-action contacts ensure that the switching process is fast and unambiguous, without delay or switching uncertainty. The metal housing design provides mechanical stability and protection against external influences. The LED indicator allows for quick visual inspection of the operating status without requiring additional measuring devices.
Compatibility and Accessories
The position switch is modular and can be combined with various accessories to meet specific requirements. Available accessories include drive heads such as 3SE5000-0AE01, cable glands such as 3SX9926, and mounting accessories such as the base plate 3SY3027 or the intermediate sheet 3SY3110. Also available are plug connectors such as the 5-pole device plug 3SY3128. Combining it with other switch types such as 3SE5112-0BE01 or the base switch 3SE5112-0CA00 allows flexible adaptation to different applications.
Mounting and Installation
Mounting is done via the integrated thread M20 x 1.5, which can be installed in standard holes or on mounting plates. The quick-connect function simplifies wiring, as cables can be connected directly without requiring additional tools or screw connections. Mounting follows standards EN 50047 and EN 50041, ensuring standardized and secure installation.
Advantages in Operation
The switch offers high operational reliability through mechanical dependability and the ability to meet the highest safety requirements according to PL e or SIL 3, depending on configuration. The low power consumption of the ASIsafe electronics reduces the load on control systems. The LED indicator enables quick status checking, and the modular design allows flexible adaptation to different requirements. Global certification according to IEC and UL ensures usability in various markets.