| General |
| Swivel lever drive | for position switches 3SE52/3SF12 |
| Switching direction | adjustable to left/right, left only, right only |
| Delivery condition | Left/right |
| Bore hole | 31 mm or 50 mm |
| Switching points | according to EN 50047 |
| Mounting | according to EN 50041 |
| Approval | IEC, UL |
| Safety rating | PL e, SIL 3 |
| Electronics | ASIsafe electronics |
| Electricity consumption | low |
| Connection plug | Quick connect |
| Status indicator | optional with LED |
| Compatibility | position switches 3SE52, 3SF12 |
| Accessories | various swivel levers, rollers, length-adjustable levers |
| Housing material | plastic, metal, compact design |
The article 3SE5000-0AK00 is a swing lever actuator of the Siemens SIRIUS 3SE5 series, specifically designed for position switches of types 3SE52 and 3SF12. It is used for position and location detection of machine parts as well as for monitoring the position of safety devices in industrial applications. The actuator has a modular design and allows high adaptability to different operating conditions through combination with various levers and rollers. The switching points are defined according to EN 50047, ensuring a standardized and precise switching function. The switching direction of the lever actuator is adjustable and can be configured for left/right, left only, or right only; the default delivery setting is left/right.
Applications
The swing lever actuator is used in industrial automation where reliable detection of motion states or positions is required. Typical application fields include monitoring of safety devices, such as safety doors or covers, as well as position monitoring of tools, conveyors, or other movable machine parts. The devices are globally approved and comply with international standards such as IEC and UL, enabling safe and reliable use in various markets.
Functions and Equipment in Detail
The actuator is designed for position switches with a bore of 31 mm or 50 mm. The quick connection technology significantly reduces mounting and connection times. Some variants of the 3SE5 series are optionally equipped with an LED status indicator, which visually signals the current state of the switch. The integrated ASIsafe electronics feature low power consumption, increasing energy efficiency. The switches can be supplied in various housing sizes, with different switching elements, and in plastic or metal versions. The compact design enables space-saving installation.
Technology Explained Simply
The switching function is achieved through the mechanical movement of the lever, which activates the internal switch. The switching points are defined according to EN 50047, ensuring a uniform and reproducible switching function. Mounting is done according to EN 50041, enabling installation on standardized bores. The integrated ASIsafe electronics enable secure communication in the AS-Interface bus system, with power supply via the network cable (PoE). The switches can be configured to meet the highest safety requirements according to PL e or SIL 3.
Compatibility and Accessories
The actuator is compatible with position switches of types 3SE52 and 3SF12. As accessories, various swing levers are available, including models with metal or plastic rollers in different diameters (e.g. 19 mm, 30 mm) and lengths (e.g. 100 mm). There are also adjustable-length swing levers and special levers for form-fit engagement. The accessories are designed for position switches 3SE51/52 and 3SE52. Installation is done via the designated bores (31 mm or 50 mm), with switching points defined according to EN 50047.
Mounting and Installation
Mounting is done by securing the actuator to the designated bore (31 mm or 50 mm) in the machine housing. The quick connection plug enables simple and fast wiring. The switching direction can be adjusted on site to achieve the desired switching function. Installation is typically tool-free, as the quick connection plug allows direct connection.
Operational Advantages
The modular design of the actuator enables flexible adaptation to different requirements. The standardized switching points according to EN 50047 and mounting according to EN 50041 ensure uniform and reliable performance. The integrated ASIsafe electronics reduce power consumption and enable secure communication in the AS-Interface bus system. The LED status indicator (on equipped variants) simplifies diagnostics and maintenance. The quick connection plug significantly reduces mounting and maintenance times. Global approval according to IEC and UL ensures usability in various markets.