Siemens 3SE50000AE01, EAN: 4011209695863

Siemens 3SE50000AE01 Drive Head for Position Switch

Industrial Material > Control devices / Pilot devices > Limit switches, mechanical

Siemens 3SE50000AE01 Drive Head for Position Switch

Lieske Part No. 564536
Mfg Part No 3SE50000AE01
EAN-Code 4011209695863
Manufacturer Siemens
Here only 25,02 EUR
29,77 EUR incl. VAT

Further information for Siemens 3SE50000AE01 Drive Head for Position Switch

General
Drive headfor position switches 3SE51/52
Lever materialMetal
Roll materialPlastic
Roll diameter22 mm
CompatibilityPosition switch 3SE51/52
InterfaceAS-Interface
ElectronicsASIsafe
ApprovalsIEC, UL
Safety requirementsPL e, SIL 3
MountingAccording to EN 50047 and EN 50041
Electricity consumptionlow
Quick connectorYes
The drive head 3SE5000-0AE01 from Siemens is a replacement part for position switches of the SIRIUS 3SE5 series, specifically designed for position and location detection of machine parts as well as status monitoring of safety devices in industrial automation. It serves as a mechanical actuator, triggering the switching function via a roller lever with a 22 mm diameter plastic roller when contacted by a moving machine part. The lever itself is made of metal, ensuring high mechanical load capacity and long service life under industrial conditions. The modular design of the 3SE5 series allows for flexible combination with various base switches and connection variants, enabling a wide range of application scenarios to be covered with a limited number of stock items.

Applications

The drive head is used in industrial manufacturing, machine and plant engineering, and automation technology, where precise and reliable position monitoring is required. It is suitable for applications where mechanical movements must be detected and converted into electrical signals, for example, for monitoring switching states, door or cover positions, or ensuring safety devices in machines. Use in combination with safety functions according to PL e or SIL 3 is possible if the appropriate switch configuration is selected.

Functions and Equipment in Detail

The drive head is designed for use with position switches of the 3SE5 series and enables simple mechanical actuation by touching the plastic roller. The roller has a diameter of 22 mm and is made of wear-resistant plastic to ensure long service life under industrial conditions. The metal lever ensures stable and precise transmission of motion to the switch mechanism. The quick-connect technology reduces installation and maintenance times, as no additional tools are required for connection. The integrated ASIsafe electronics enable direct connection to the AS-Interface bus system, keeping power consumption low and ensuring efficient network communication.

Technology Explained Simply

The drive head operates mechanically: when the plastic roller is touched by a moving machine part, the lever is activated and triggers the switching operation in the base switch below. The switching function is realized through the electrical contacts in the base switch, with the drive head only transmitting the mechanical input energy. The use of ASIsafe electronics means the switch communicates via the AS-Interface bus system, enabling decentralized control and monitoring. The low power consumption of the electronics reduces the load on the overall system and supports energy-efficient operation.

Compatibility and Accessories

The drive head 3SE5000-0AE01 is specifically designed for position switches of the 3SE51 and 3SE52 series. It is compatible with various base switches of the 3SE5 series, such as models 3SE5122-0KA00-1CA0, 3SE5112-1KA00, 3SE5112-0PA00, 3SE5122-0BA00, 3SE5112-0LA00, 3SE5115-0CA00-1AD0, 3SE5115-0KA00-1AD1, 3SE5114-1CA00-1AF5, 3SE5112-3LA00, 3SE5122-0PA00, 3SE5112-0BA00, 3SE5000-0AE02, 3SF1114-1KA00-1BA1, 3SE5115-0LA00-1AD1, 3SE5122-0CA00-1CA0, 3SE5122-0BA00-1CA0. Combination with base switches featuring M12 connectors or LED status indicators is also possible, depending on the system requirements. Switching points and mounting comply with standards EN 50047 and EN 50041, ensuring standardized installation and interchangeability.

Installation and Mounting

Mounting is done by mechanical fastening to the base switch, with the quick-connect feature allowing connection without tools. The drive head is positioned according to the direction of motion of the machine part to be monitored, ensuring the roller is directly contacted by the moving component. Mounting follows standards EN 50047 and EN 50041, enabling universal adaptation to various machine construction designs. Installation requires no special tools, as the quick-connect feature allows direct connection at the device.

Operational Advantages

The drive head offers high mechanical robustness due to the metal lever and wear-resistant plastic roller, ensuring long service life under industrial conditions. The quick-connect feature significantly reduces installation and maintenance times. Compatibility with AS-Interface enables integrated communication within the automation system, making system monitoring and control more efficient. The low power consumption of the ASIsafe electronics reduces the load on the overall system. The modular design of the 3SE5 series allows flexible adaptation to different requirements, simplifying maintenance and interchangeability.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/564536
qrcode für Siemens 3SE50000AE01 Drive Head for Position Switch