Siemens 3SE50000AA01, EAN: 4011209695443

Siemens 3SE50000AA01 Lever for 3SE51

Industrial Material > Control devices / Pilot devices > Limit switches, mechanical

Siemens 3SE50000AA01 Lever for 3SE51

Lieske Part No. 406030
Mfg Part No 3SE50000AA01
EAN-Code 4011209695443
Manufacturer Siemens
Here only 7,06 EUR
8,40 EUR incl. VAT

Further information for Siemens 3SE50000AA01 Lever for 3SE51

General
Lever length27 mm
Step length9 mm
Roll materialPlastic
Roll diameter19 mm
Lever materialMetal
Lever shapeA
CompatibilityPosition switch 3SE51
NormDIN EN 50041
ApprovalIEC, UL
Safety functionPL e, SIL 3
The article 3SE5000-0AA01 is a swing lever for position switches of the 3SE51 series by Siemens, specifically designed for use in industrial applications for position and location detection of machine parts as well as for monitoring the position of safety devices. It is part of the modular SIRIUS system, which enables a high degree of variant diversity through a small number of basic components. The lever is mounted on swing actuators of the 3SE5 series and serves as a mechanical actuator for the switching function of the position switch.

Applications

The swing lever 3SE5000-0AA01 is designed for use in industrial automation technology, particularly in systems requiring precise position monitoring. It is suitable, for example, for monitoring slides, doors, protective covers, or other movable machine parts. The construction in accordance with DIN EN 50041 ensures standardized mounting and switching function, which is required in many industrial environments. Use in safety-critical systems is possible if the corresponding switch configuration meets the requirements for PL e or SIL 3.

Functions and Equipment in Detail

The lever is made of metal and has a total length of 27 mm, with the step measuring 9 mm. At the tip, a plastic roller with a diameter of 19 mm is attached, enabling the mechanical actuation of the switch. The roller ensures smooth and wear-resistant movement when activating the switch. The lever type A is designed for swing actuators requiring rotational movement around a fixed point. The integrated ASIsafe electronics in the 3SE5 series position switches require only low current consumption, increasing energy efficiency.

Technology Explained Simply

The swing lever operates mechanically: when a machine part moves, the lever is actuated by contact, causing the connected position switch to change its state. The switching function is performed by the plastic roller, which presses against a switch contact. The quick-connect technology used in the 3SE5 series position switches significantly reduces installation and maintenance times. Switching points and mounting are in accordance with standards EN 50047 and EN 50041, ensuring globally recognized standardization. The devices are globally approved, including according to IEC and UL standards.

Compatibility and Accessories

The swing lever 3SE5000-0AA01 is specifically designed for position switches of the 3SE51 series. It is compatible with various base switches such as the 3SE5112-0CA00 or 3SE5112-0PA00, which also belong to the 3SE5 family. Depending on the configuration, accessories such as drive heads, connectors, and additional mounting and connection accessories are available. The 3SF1 series offers direct connection to the AS-Interface bus system, facilitating integration into higher-level control systems. Some variants of the 3SE5 series are optionally available with LED status indicators and M12 connectors, simplifying diagnostics and maintenance.

Mounting and Installation

Mounting is done on a swing actuator of the 3SE5 series, with fastening according to EN 50041. The quick-connect technology allows for easy and fast connection of electrical wiring. Mechanical installation requires no special tools, as fastening is done via standardized threads (e.g., M20x1.5). The lever must be positioned so that the movement of the machine part reliably actuates the lever.

Advantages in Operation

The swing lever offers high mechanical robustness due to its metal construction and wear-resistant plastic roller. The modular design of the 3SE5 series allows flexible adaptation to different requirements without the need for a large number of stock items. Standardization according to EN 50041 and EN 50047 ensures worldwide usability. The integrated ASIsafe electronics reduce energy consumption and support integration into safety-critical systems. The quick-connect technology reduces installation and maintenance times.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/406030
qrcode für Siemens 3SE50000AA01 Lever for 3SE51