| General |
| Nominal current | 63 A |
| Motor power | 30 kW |
| Supply voltage | 400 V |
| Operating voltage | 200–480 V AC |
| Control supply voltage | 24 V AC/DC |
| Degree of protection | IP20 |
| Switching type | Screw terminals |
| Motor protection | Thermistor |
| Bypass | Integrated |
| Remote reset | Integrated |
| Approvals | IEC, UL/CSA, ATEX, IEC Ex |
| Max. ambient temperature | 40 °C |
The Siemens soft starter type 3RW4037-1TB04 belongs to the SIRIUS series and is designed for smooth start-up and shut-down of three-phase asynchronous motors in standard applications. It enables stepless starting, thereby reducing current peaks, avoiding voltage fluctuations during start-up, and relieving the power supply network. At the same time, mechanical stress on the drive is reduced, which can extend the service life of the system. Compared to star-delta starters or frequency converters, the soft starter offers significant space and wiring savings. The maintenance-free switching function and easy handling simplify operation and maintenance in industrial use.
Applications
The soft starter is suitable for industrial applications where a smooth motor start is required to minimize mechanical and electrical stress. Typical applications include conveyor systems, pumps, fans, presses, and other drives where a sudden start-up could cause damage or network disturbances. Worldwide approval according to IEC and UL/CSA, as well as suitability for hazardous areas (ATEX or IEC Ex), expands the application range in sensitive environments.
Functions and Equipment in Detail
The soft starter features an integrated bypass, enabling a compact design and reducing heating in the enclosure. Intelligent monitoring protects the soft starter from overheating and the motor from overload. During start-up, the current can be limited to an adjustable maximum value to avoid network loading. An integrated remote reset enables remote troubleshooting, increasing operational uptime and reducing maintenance intervals. The integrated thermistor motor protection monitors motor heat and protects against overheating.
Technology Explained Simply
The soft starter operates with continuous voltage control, allowing the motor speed to increase gradually instead of suddenly reaching full load. The control supply voltage is AC/DC 24 V, enabling flexible integration into existing control systems. The operating voltage range is AC 200–480 V, making the starter usable in various network voltages worldwide. Screw terminals ensure a secure and reliable connection for the wiring. The maximum current is 63 A, sufficient for motors up to 30 kW at 400 V network voltage.
Compatibility and Accessories
The soft starter is part of the SIRIUS system building kit and can be combined with various accessories. These include, for example, connection modules that allow direct mounting on power circuit breakers, even with variants featuring spring-loaded connections. Optionally, a fan can be installed to improve air circulation in the enclosure and enable a denser build. Other compatible components include NH fuses, terminal covers, and power circuit breakers, contributing to safe and structured installation.
Mounting and Installation
Mounting is done in an enclosure, where the screw terminals ensure a secure connection for the wiring. Installation is typically carried out by qualified personnel who comply with electrical regulations and safety requirements. The integrated bypass function reduces thermal load, allowing higher mounting density in the enclosure. If required, the soft starter can be supplemented with an optional fan to improve cooling.
Advantages in Operation
Operation of the soft starter is maintenance-free and does not require regular inspections. The integrated protection functions ensure high operational safety. The remote reset function allows quick fault resolution without physical access. The reduction of current peaks and mechanical stress leads to a longer service life of the system and lower maintenance costs. The compact design and easy integration into existing systems increase installation efficiency.