Siemens 3RV20214FA10, EAN: 4011209716278

Siemens 3RV2021-4FA10 Motor Protection Switch 40 A

Industrial Material > Control devices / Pilot devices > Breakers and disconnectors

Siemens 3RV2021-4FA10 Motor Protection Switch 40 A

Lieske Part No. 547724
Mfg Part No 3RV20214FA10
EAN-Code 4011209716278
Manufacturer Siemens
Here only 245,07 EUR
291,63 EUR incl. VAT

Further information for Siemens 3RV2021-4FA10 Motor Protection Switch 40 A

General
Degree of protectionIP20
Operating voltage690 V
Operating frequency50...60 Hz
Nominal operating current40 A
Overload protectorthermal, class 10
Short-circuit releasemagnetic, 480 A
Insulation voltage690 V
Overvoltage withstand6 kV
Power loss14 W
Operation temperature-20...+40 °C
Storage and transport temperature-50...+80 °C
Relative humidity10...95 %
Temperature compensation-20...+60 °C
Mountingon 35 mm standard mounting rail
ApprovalsIEC, UL/CSA
Accessoriesauxiliary switch, undervoltage trip unit, voltage trip unit
Switching capacityStandard
Connection typeScrew connection
Construction sizeS0
Short-circuit current (Icu)100 kA at 240 V, 20 kA at 400 V, 6 kA at 500 V, 3 kA at 690 V
Short-circuit current (Ics)100 kA at 240 V, 10 kA at 400 V, 3 kA at 500 V, 2 kA at 690 V
Screw terminalYes
Use in IT networksYes
The Siemens power switch type 3RV2021-4FA10 belongs to size S0 and is specifically designed for motor protection. It features a thermal overload release of class 10 with an adjustable tripping value of 34 to 40 amperes and a magnetic short-circuit release with a rated tripping value of 480 amperes. The switch is equipped with screw terminals and offers standard switching capacity. It is used for safe disconnection in case of short circuit and for protecting consumers and installations against overload, as well as for safe isolation of the installation from the network. The compact design and low heat generation make it particularly suitable for use in consumer branches, including drives with IE3/IE4 efficiency class.

Applications

The power switch is intended for various applications in the industrial sector, including motor protection, installation protection, short-circuit protection of starter combinations, transformer protection, as well as main and EMERGENCY-OFF switches. It is also suitable for use in IT networks. The worldwide approval according to IEC and UL/CSA enables use in various markets. Additionally, applications in hazardous areas (ATEX or IEC Ex) are possible, with certification available upon request.

Functions and Equipment in Detail

The switch features a thermal overload release that responds based on heat development within the device and thus protects against overload. The magnetic short-circuit release reacts to high current surges and disconnects within the shortest time to prevent damage to the installation. The screw terminal variant ensures a secure and vibration-resistant connection. The devices are designed for use in networks with an earthed star point, with the maximum permissible voltage between main and auxiliary circuit being 400 V.

Technology Explained Simply

The switch is designed for an operating voltage of up to 690 V and can be operated at a frequency of 50 to 60 Hz. The rated operating current is 40 A. For AC-3 operation, the operating powers vary depending on the voltage level: 11,000 W at 230 V, 18,500 W at 400 V, 22,000 W at 500 V, and 39,000 W at 690 V. The electrical life expectancy is typically 100,000 switching cycles, as is the mechanical life expectancy. The insulation voltage is 690 V at pollution degree class 3. The surge withstand voltage is 6 kV. The protection rating IP20 applies to both the front and the terminal connections. The devices are designed for an operating temperature of -20 to +40 °C, with storage and transport temperature up to +80 °C. The relative humidity during operation is 10 to 95 %.

Compatibility and Accessories

The power switch is part of the SIRIUS system building kit and can be combined with various accessories, including auxiliary switches in different versions (horizontal, side-pluggable, with different contact arrangements), under-voltage releases for various voltage ranges (e.g. 24 V, 110 V, 240 V, 480 V) and voltage releases for AC 50/60 Hz. The accessories are uniformly available for all sizes and allow flexible adaptation to specific requirements. Installation is on a 35 mm standard mounting rail according to DIN EN 60715 using screw or spring clamp fastening.

Installation and Mounting

The switch is mounted on a 35 mm standard mounting rail, with the mounting position being freely selectable. The dimensions are 97 mm height, 45 mm width, and 96 mm depth. For side-by-side arrangement, no additional front clearance is required. The devices are designed for a maximum installation height of 2,000 m above sea level. Temperature compensation occurs in the range of -20 to +60 °C.

Operational Advantages

The switch is characterised by low power loss of typically 14 W, which minimises heat generation and expands application possibilities in densely packed control cabinets. The uniform accessory interface enables flexible expansion of functions. The worldwide approval and compatibility with various network voltages and frequencies increase application flexibility. The mechanical and electrical life expectancy of 100,000 switching cycles each ensures high operational reliability over a long period.

Protection Rating and Environmental Conditions

The protection rating IP20 protects against finger contact and against entry of solid foreign objects larger than 12.5 mm. The devices are designed for an operating temperature of -20 to +40 °C, with storage and transport temperature up to +80 °C. The relative humidity during operation is 10 to 95 %. The devices are designed for a maximum installation height of 2,000 m above sea level. Temperature compensation occurs in the range of -20 to +60 °C.

Accessories and Expansion Options

Available accessories include auxiliary switches in various versions (e.g. horizontal, side-pluggable, with 1 changeover contact, 1S + 1OE), under-voltage releases for various voltage ranges (e.g. 24 V, 110 V, 240 V, 480 V) and voltage releases for AC 50/60 Hz. The accessories are uniformly available for all sizes and allow flexible adaptation to specific requirements. Installation is on a 35 mm standard mounting rail according to DIN EN 60715 using screw or spring clamp fastening.

Approvals and Standards

The switch complies with worldwide approvals according to IEC and UL/CSA. Certification for use in hazardous areas (ATEX or IEC Ex) is available upon request. The devices are suitable for use in IT networks. The devices are marked according to DIN EN 81346-2 Q, ensuring safety against electric shock. The devices are designed for an operating voltage of up to 690 V and can be operated at a frequency of 50 to 60 Hz.

Functions and Equipment in Detail

The switch features a thermal overload release that responds based on heat development within the device and thus protects against overload. The magnetic short-circuit release reacts to high current surges and disconnects within the shortest time to prevent damage to the installation. The screw terminal variant ensures a secure and vibration-resistant connection. The devices are designed for use in networks with an earthed star point, with the maximum permissible voltage between main and auxiliary circuit being 400 V.

Compatibility and Accessories

The power switch is part of the SIRIUS system building kit and can be combined with various accessories, including auxiliary switches in different versions (horizontal, side-pluggable, with different contact arrangements), under-voltage releases for various voltage ranges (e.g. 24 V, 110 V, 240 V, 480 V) and voltage releases for AC 50/60 Hz. The accessories are uniformly available for all sizes and allow flexible adaptation to specific requirements. Installation is on a 35 mm standard mounting rail according to DIN EN 60715 using screw or spring clamp fastening.

Installation and Mounting

The switch is mounted on a 35 mm standard mounting rail, with the mounting position being freely selectable. The dimensions are 97 mm height, 45 mm width, and 96 mm depth. For side-by-side arrangement, no additional front clearance is required. The devices are designed for a maximum installation height of 2,000 m above sea level. Temperature compensation occurs in the range of -20 to +60 °C.

Operational Advantages

The switch is characterised by low power loss of typically 14 W, which minimises heat generation and expands application possibilities in densely packed control cabinets. The uniform accessory interface enables flexible expansion of functions. The worldwide approval and compatibility with various network voltages and frequencies increase application flexibility. The mechanical and electrical life expectancy of 100,000 switching cycles each ensures high operational reliability over a long period.

Protection Rating and Environmental Conditions

The protection rating IP20 protects against finger contact and against entry of solid foreign objects larger than 12.5 mm. The devices are designed for an operating temperature of -20 to +40 °C, with storage and transport temperature up to +80 °C. The relative humidity during operation is 10 to 95 %. The devices are designed for a maximum installation height of 2,000 m above sea level. Temperature compensation occurs in the range of -20 to +60 °C.

Accessories and Expansion Options

Available accessories include auxiliary switches in various versions (e.g. horizontal, side-pluggable, with 1 changeover contact, 1S + 1OE), under-voltage releases for various voltage ranges (e.g. 24 V, 110 V, 240 V, 480 V) and voltage releases for AC 50/60 Hz. The accessories are uniformly available for all sizes and allow flexible adaptation to specific requirements. Installation is on a 35 mm standard mounting rail according to DIN EN 60715 using screw or spring clamp fastening.

Approvals and Standards

The switch complies with worldwide approvals according to IEC and UL/CSA. Certification for use in hazardous areas (ATEX or IEC Ex) is available upon request. The devices are suitable for use in IT networks. The devices are marked according to DIN EN 81346-2 Q, ensuring safety against electric shock. The devices are designed for an operating voltage of up to 690 V and can be operated at a frequency of 50 to 60 Hz.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/547724
qrcode für Siemens 3RV2021-4FA10 Motor Protection Switch 40 A