Siemens 3RV20111GA15, EAN: 4011209840959

Siemens 3RV20111GA15 Power Switch 4.5–6.3 A

Industrial Material > Control devices / Pilot devices > Breakers and disconnectors

Siemens 3RV20111GA15 Power Switch 4.5–6.3 A

Lieske Part No. 449934
Mfg Part No 3RV20111GA15
EAN-Code 4011209840959
Manufacturer Siemens
Here only 121,31 EUR
144,36 EUR incl. VAT

Further information for Siemens 3RV20111GA15 Power Switch 4.5–6.3 A

General
Construction sizeS00
Degree of protectionCLASS 10
A-trigger4,5-6,3 A
N-trigger82 A
Connection typeScrew connection
Auxiliary switchhorizontal, 1S+1NC
Switching capacityStandard switching capacity
Application rangemotor protection, plant protection, short-circuit protection, transformer protection, main and emergency stop switch, IT networks
ApprovalsIEC, UL/CSA, ATEX, IEC Ex
SystemSIRIUS 3RV2
The Siemens power switch type 3RV2011-1GA15 belongs to size S00 and is specifically designed for motor protection. It features a CLASS 10 A-trip unit with an adjustable range of 4.5 to 6.3 A and an N-trip unit at 82 A. The switch is equipped with screw terminals and offers standard switching capacity. An integrated horizontal auxiliary switch with 1 normally open and 1 normally closed contact (1S+1Oe) enables control and signal transmission during plant operation. The SIRIUS 3RV2 series ensures safe disconnection in case of short circuit, as well as protection of consumers and systems against overload. Additionally, the switch guarantees safe isolation of the system from the network. Its compact design and low heat dissipation make it particularly suitable for use in consumer branches, especially for IE3- and IE4-motors.

Applications

The power switch is intended for various applications in industrial environments. It can be used as a motor protection switch, also fulfilling the function of an overload relay. Further applications include system protection, short-circuit protection for starter combinations, transformer protection, and use as a main or emergency stop switch. The devices are also suitable for use in IT networks. Worldwide approvals according to standards such as IEC and UL/CSA, as well as suitability for explosive atmospheres (ATEX or IEC Ex), extend the range of applications in international and special use cases.

Functions and Equipment in Detail

The switch ensures safe and reliable operation through the combination of short-circuit protection and overload protection. The CLASS 10 A-trip unit responds to overloads in the range of 4.5 to 6.3 A, while the N-trip unit trips at 82 A. The integrated auxiliary switch function with 1S+1Oe enables remote control and feedback of the switch status. The screw terminal connection ensures a vibration-resistant and maintenance-free connection. The devices are part of the SIRIUS system building kit and replace the previous 3RV1 series.

Technology Explained Simply

The CLASS 10 A-trip unit means that the switch trips within a defined time when the overload reaches 10 times the set rated current. This protects connected motors and systems from damage. The N-trip unit at 82 A provides short-circuit protection. The integrated auxiliary switch function enables control of auxiliary circuits, for example, to indicate the switch status or for remote control. The screw terminals are designed for a secure and durable connection that remains stable even under vibration.

Compatibility and Accessories

The device is compatible with a comprehensive range of accessories, uniformly available for all sizes in the SIRIUS system. Compatible components include auxiliary switches such as the 3RV2901-1A (side-mounted, 1S+1Oe) or the 3RV2901-1B (side-pluggable), as well as undervoltage release units such as the 3RV2902-1AB0. Additional accessories include 3-phase feed-in terminals (e.g. 3RV2925-5AB) and busbars (e.g. 3RV1915-1BB for 3 power switches). Combining with the SIRIUS 3RV29 feed-in system significantly reduces main circuit wiring.

Mounting and Installation

The power switch is designed for mounting in enclosures or distribution boards. The screw terminals allow for quick and secure connections. Size S00 is compact and suitable for densely populated control panels. Installation must follow the technical specifications of the relevant standards and application. The integrated auxiliary switches facilitate integration into control and monitoring systems.

Advantages in Operation

The switch is characterised by high reliability and low maintenance requirements. Low heat dissipation reduces thermal stress on the environment and increases service life. Worldwide approvals and suitability for explosive atmospheres extend the range of applications. Compatibility with the SIRIUS system building kit enables flexible and modular adaptation to different requirements. The integrated auxiliary switch function supports automation and remote monitoring in industrial operations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/449934
qrcode für Siemens 3RV20111GA15 Power Switch 4.5–6.3 A