| General |
| Operating voltage | 400 V |
| Frequency | 50/60 Hz |
| Power | 5,5 kW |
| Technology | RC-element |
| Compatibility | motor contactor 3RT201 |
The Siemens motor protection switch 3RT2916-1PA1 is an EMC suppression module specifically developed for use with contactors of the 3RT201 series. The module serves to reduce electromagnetic disturbances that may occur during switching operations of electrical drives. It is designed as an RC circuit, meaning it consists of a resistor and a capacitor that together dampen interference voltages in the network. The application is in industrial plants where high EMC compatibility is required to ensure the functionality of controls, sensors, and other electronic devices.
Applications
The EMC suppression module 3RT2916-1PA1 is designed for use in industrial drive systems, particularly in plants with contactors of the 3RT201 series. It is used to improve electromagnetic compatibility (EMC) by damping disturbances in the frequency range of 50/60 Hz. The application is in plants with an operating voltage up to 400 V AC/DC, with power consumption up to 5.5 kW. The use is especially beneficial in environments with sensitive electronics to minimize disturbances caused by switching operations.
Functions and Equipment in Detail
The module operates as an RC circuit, effectively reducing interference voltages generated during motor switching. The combination of resistor and capacitor enables targeted damping in the frequency range typical for industrial drives. The maximum power is 5.5 kW, enabling use for medium-sized drives. The operating voltage is 400 V, with a frequency of 50/60 Hz. Compatibility is limited to contactors of the 3RT201 series, allowing direct integration into existing systems.
Technology Explained Simply
An RC circuit consists of a resistor (R) and a capacitor (C), connected in series or parallel. In this module, the combination is used to filter interference voltages generated when switching electrical loads. The disturbances are short-circuited by the capacitor, while the resistor dissipates the energy. This prevents disturbances from being transmitted through the network to other devices. The technology is particularly effective for switching operations that generate high voltage spikes, such as those occurring when motors are activated.
Compatibility and Accessories
The module is specifically developed for contactors of the 3RT201 series and can be directly integrated into these. It is not suitable for other contactor types. As compatible accessories, the module 3RT2916-1PB1 is offered, which is also designed as an EMC suppression module for contactors S00 3RT2916-1PB1. Using both modules enables consistent EMC coverage in systems with multiple contactors. Compatibility is limited to the specified types, with no additional accessories or adapters required.
Mounting and Installation
Mounting is done directly onto the 3RT201 contactor, with no additional tools or adapters required. Installation is part of the system setup and is carried out via direct mechanical and electrical connection. The exact mounting instructions are included in the technical datasheet for the 3RT201 contactors, as the module is considered an integrated component of the system.
Advantages in Operation
Using the EMC suppression module 3RT2916-1PA1 leads to a significant reduction in electromagnetic disturbances in the drive system. This improves EMC compatibility and protects sensitive electronic components from interference. The stability of control systems is enhanced, resulting in more reliable operation of the entire plant. Integration into existing systems requires no additional effort, as the module is directly integrated into the 3RT201 contactors. The operating voltage of 400 V and frequency of 50/60 Hz cover most industrial applications.