| General |
| Construction size | S0 |
| Nominal voltage | 400 V |
| Nominal power | 11 kW |
| Nominal current | 25 A |
| Actuation voltage | 230 V |
| Frequency | 50 Hz |
| Switching type | AC-3e/AC-3 |
| Number of auxiliary contacts | 1 S + 1 Ö |
| Connection system | Spring clamp connection |
| Number of poles | 3 way |
| Approvals | IEC, UL/CSA |
| IE-Ready | IE3/IE4-ready |
The Siemens contactor 3RT2026-2AP00 belongs to the SIRIUS series 3RT2 and is designed for industrial applications, particularly for switching electric motors. It is a 3-pole contactor in size S0, rated for a nominal voltage of 400 V and a nominal power of 11 kW. Operation is via an AC coil with 230 V and 50 Hz. The device features integrated auxiliary contacts in the configuration 1 S + 1 Ö, connected via spring-cage terminals on the front. This design enables quick, maintenance-free, and vibration-resistant wiring, which is particularly advantageous in moving or vibration-prone environments.
Applications
This contactor is suitable for use in industrial drive systems where reliable and safe switching of motors is required. It is used in manufacturing plants, packaging industries, or building automation, where it can be combined in consumer branches with other components such as overload protection, fuses, or control devices. The 3RT2 contactors replace the previous series 3RT1 (up to 55 kW) and are part of the comprehensive SIRIUS system building kit, which offers a modular and scalable system architecture.
Functions and Equipment in Detail
The device is equipped with an integrated auxiliary switch block providing one normally closed and one normally open contact (1 S + 1 Ö). These contacts are used for signal processing in control systems, for example, to feed back the switching status to a PLC or control panel. The front-side spring-cage terminals reduce installation effort and increase connection reliability. The contactors are designed for operation in various environments, including climate-resistant operating conditions, and comply with international standards such as IEC and UL/CSA.
Technology Explained Simply
Operation is via an electromagnetic coil that closes the main contact when the operating voltage (AC 230 V, 50 Hz) is applied. The rated current is 25 A, suitable for switching motors up to 11 kW at 400 V. The switching function follows the AC-3e/AC-3 standard, intended for operation of asynchronous motors with direct-on-line (DOL) starting. The integrated auxiliary contacts allow direct feedback to the control system without additional wiring. The spring-cage terminal technology ensures a mechanically stable connection that does not loosen even under vibrations.
Compatibility and Accessories
The contactor is part of the SIRIUS system building kit and can be combined with a wide range of accessories also available in size S0. These include auxiliary switch blocks such as the 3RH2911-2XA22-0MA0 (1S+1Ö) or the 3RH2911-2FA40 (4S 1S 1S), connection modules such as the 3RT2926-3AB31 (linking block), and identification plates such as the 3RT2900-1SB10. The use of connection modules and function modules significantly reduces wiring effort. The devices are suitable for connection to control systems via ASi or IO-Link, enabling flexible integration into modern automation systems.
Mounting and Installation
Mounting is done in standard control panels or enclosures. The front-side spring-cage terminals allow quick and secure wiring without additional tools. Size S0 is compact and allows dense mounting. The contactors are designed for industrial environments and can be installed in combination with other SIRIUS components such as overload protection switches or fuses. Factory-tested combinations ensure safe and reliable operation.
Advantages in Operation
The contactor offers high contact reliability and a compact design that minimizes space requirements in enclosures. The integrated auxiliary contacts reduce wiring complexity and enable direct feedback to the control system. The spring-cage terminal technology ensures maintenance-free and vibration-resistant connections, increasing operational safety. Global certification according to IEC and UL/CSA, as well as IE3/IE4-Ready characteristics, make the device suitable for use in various markets. The modular system architecture of the SIRIUS building kit allows flexible expansion and adaptation to future requirements.