Siemens 3RT12646AS36, EAN: 4011209508750

Siemens 3RT1264-6AS36 vacuum contactor 110 kW DC operation

Industrial Material > Industrial relays and contactors > Contactors

Siemens 3RT1264-6AS36 vacuum contactor 110 kW DC operation

Lieske Part No. 101419
Mfg Part No 3RT12646AS36
EAN-Code 4011209508750
Manufacturer Siemens
Here only 2.131,28 EUR
2.536,22 EUR incl. VAT

Further information for Siemens 3RT1264-6AS36 vacuum contactor 110 kW DC operation

General
Degree of protectionweatherproof
Nominal power110 kW
Nominal voltage400 V
Nominal current225 A
Actuation voltage500–550 V AC
Frequency50–60 Hz
Switching typeAC-3e/AC-3
DriveConventional
Auxiliary switch2 S + 2 Ö
Main power connectionRail
Control and auxiliary power connectionScrew connection
Construction sizeS10
ApprovalsIEC, UL/CSA
Energy efficiencyIE3/IE4-ready
The Siemens vacuum contactor type 3RT1264-6AS36 is a power contactor from the SIRIUS series, specifically designed for industrial applications to switch electric motors. It features a rated power of 110 kW at 400 V and a rated current of 225 A in AC-3e/AC-3 operation. The contactor size S10 enables compact mounting, with main current circuits connected via a rail. Control and auxiliary current circuits are equipped with screw terminals. The device is designed for an operating voltage range of 500 to 550 V AC (50–60 Hz), with conventional actuation. The contactors are part of the SIRIUS system building kit, enabling modular and coordinated integration of components.

Applications
This vacuum contactor is designed for use in industrial plants, particularly for operating electric motors with high switching frequencies. It is especially suitable for start-stop operation, where frequent switching is required. The high switching life and contact reliability ensure reliable performance under demanding operating conditions. The contactors are globally approved and comply with standards such as IEC and UL/CSA. They are IE3/IE4-ready, ensuring compatibility with energy-efficient motors.

Functions and Equipment in Detail
The contactor features pre-mounted auxiliary switches with a configuration of 2 normally closed contacts and 2 normally open contacts, simplifying integration into control systems. The auxiliary switches allow direct connection to control systems or PLC inputs. The contactors are weather-resistant and can be used in various environments. The use of vacuum contacts ensures high contact reliability and minimizes wear caused by arcing. The switching function is achieved via a conventional drive, designed for an operating voltage of 500–550 V AC.

Technology Explained Simply
Vacuum contactors use vacuum contacts, which, unlike conventional air contacts, are not subject to oxidation or contamination from humidity. This results in a longer service life and more reliable switching performance, especially with frequent switching. Operation is achieved via a coil, which, when energized with the operating voltage, pulls in the armature and closes the contacts. The switching capacity of 110 kW at 400 V and 225 A is suitable for medium to large motors. The contactors are designed for industrial environments, with screw terminals in the control and auxiliary circuits ensuring a secure and durable connection.

Compatibility and Accessories
The contactor is part of the SIRIUS system building kit and can be combined with various accessory components. These include auxiliary switch blocks such as the 3RH1921-1KA02 or 3RH1921-1EA02, which are equipped with 2 normally open contacts or 2 normally closed contacts, respectively, depending on requirements. For mechanical interlocking, components such as the 3RA19542A are available. Terminal covers such as the 3RT1966-4EA1 or 3RT1966-4EA2 protect the connection terminals from mechanical damage. Additional components such as sealable covers (3RT1926-4MA10) or identification plates (3RT2900-1SB10) support safe and orderly installation. The contactors can also be combined with vacuum switching tubes (3RT1964-6V), designed for size S10.

Mounting and Installation
Mounting is done via a rail in the main current circuit, with connections made via screw terminals. Installation does not require special tools, as the screw terminals are standardized. The pre-mounted auxiliary switches reduce installation effort and complexity of the wiring setup. The contactors are designed for use in enclosures and can be installed in combination with other SIRIUS components. The use of wiring kits can significantly reduce wiring effort.

Advantages in Operation
Vacuum contactors offer a high switching life, extending maintenance intervals and reducing operating costs. Contact reliability ensures stable performance, even with frequent switching. The modular design of the SIRIUS system allows flexible adaptation to different requirements. Global approval and compatibility with IE3/IE4 motors increase application possibilities. The contactors are designed for industrial environments and provide reliable performance under demanding conditions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/101419
qrcode für Siemens 3RT1264-6AS36 vacuum contactor 110 kW DC operation