Further information for Siemens 3RH2131-2JC40 auxiliary contactor 3S+1Ö DC 30 V
General
Degree of protection
weatherproof
Actuation voltage
30 V DC
Operating voltage range
0,7-1,25*Us
Connection system
Spring clamp connection
Contact arrangement
3S+1Ö
Construction size
S00
Approvals
IEC, UL/CSA
Compatibility
accessories for contactor series 3RT2 (size S00-S3)
Integrated diode
The Siemens coupling auxiliary contactor 3RH2131-2JC40 is a component of the SIRIUS series, specifically designed for use in control circuits for signal multiplication and transmission. It enables direct connection to electronic controls such as PLC outputs and allows simultaneous switching of multiple auxiliary circuits. The device features size S00 and is equipped with spring-cage terminals, enabling quick and reliable installation in enclosures. The contacts are configured as 3 normally closed (S) and 1 normally open (Ö), making it flexible for use in various control systems. Operation is performed with direct current (DC) at 30 V, with an operating voltage range between 0.7- and 1.25-times the rated voltage. An integrated diode protects the control electronics from voltage spikes during switching off. The coupling auxiliary contactor is not expandable with additional auxiliary switches, as it is specifically designed for direct actuation by electronic systems.
Applications
The coupling auxiliary contactor 3RH2131-2JC40 is used in industrial control systems where it is necessary to distribute a control signal to multiple consumers or switching stages. It is particularly suitable for applications where electronic controls such as PLCs must be directly connected to mechanical switching contacts. The standardized terminal designation and weather-resistant design make it suitable for use in various environments, including industrial installations with high requirements for reliability and service life. Certifications according to IEC as well as UL/CSA enable worldwide use in different markets.
Functions and Equipment in Detail
The device features output multiplication, enabling simultaneous switching of multiple auxiliary circuits. The contacts are equipped with positive mechanical guidance, making them suitable for safety applications, especially in variants complying with SUVA requirements. The spring-cage technology ensures a secure and quick connection without requiring additional tools. The integrated diode protects the actuating electronics from inductive voltage spikes that may occur when the contact is switched off. Operation is performed with a DC voltage of 30 V, with an operating voltage range between 0.7- and 1.25-times the rated voltage, providing high tolerance to voltage fluctuations.
Technology Explained Simply
The integrated diode in the coupling auxiliary contactor serves as protection for the actuating electronics. When the contact is switched off, a high voltage spike is generated due to the inductance of the coil, which could damage the control system. The diode diverts this voltage spike and thus protects the connected electronics. The spring-cage technology enables quick and secure installation without requiring screwdrivers or other tools. The size S00 is compact and fits into standardized enclosure modules. Operation with DC 30 V is typical for PLC systems, which often operate with direct current.
Compatibility and Accessories
The coupling auxiliary contactor 3RH2131-2JC40 is part of the SIRIUS system kit and can be combined with accessories from the contactor series 3RT2, particularly for sizes S00 to S3. Compatible accessories include various auxiliary switch blocks, such as the 3RH2911-2HA01 with 1Ö, or the 3RH2911-2HA12 with 1S+2Ö, which however cannot be directly mounted on this model, as it is not expandable. Electronic delayed auxiliary switches such as the 3RA2813-2FW10 or 3RA2814-2FW10 can be used in systems requiring time-delayed switching functions, but cannot be directly mounted on this coupling auxiliary contactor.
Mounting and Installation
Mounting is performed using spring-cage technology, enabling quick and secure connection. The terminals are designed for direct connection to electronic controls, with standardized labeling ensuring correct assignment. The device is intended for use in enclosures and requires no additional mounting aids. The size S00 allows for compact placement in standardized modules.
Advantages in Operation
The coupling auxiliary contactor offers high contact reliability and is weather-resistant, ensuring long service life and low maintenance frequency. Direct actuation by PLC outputs reduces the number of required components and simplifies circuit design. The integrated diode protects the control electronics, and the spring-cage technology accelerates installation. Certifications according to IEC and UL/CSA enable use in various markets without additional conformity assessments.