| General |
| Product type | AS-Interface module |
| Degree of protection | IP20 |
| Number of inputs | 4 |
| Number of outputs | 4 |
| Type of input | 3-wire sensor |
| Output current per output | 2 A |
| Output operating voltage | 24 V DC |
| Max. total current outputs | 6 A |
| Maximum input current | 200 mA |
| Connection type | Combicon |
| Mounting width | 90 mm |
The Siemens AS-Interface Module F90, type 3RG9004-0DA00, is a digital I/O module for use in industrial automation systems. It serves as an interface between decentralized sensors and actuators and the higher-level control unit in the AS-Interface bus system. The module features four digital inputs and four digital outputs and is designed for use in enclosures with IP20 protection rating. The width is 90 mm, making it suitable for standard control panels.
Applications
The module is intended for applications in industrial automation, particularly in environments where decentralized connection of 2- or 3-wire sensors and actuators is required. It is suitable, for example, for controlling valves, switches, motors, or other electrical components in production plants, material handling systems, or machine building.
Functions and Equipment in Detail
The module provides four digital inputs designed for connecting 3-wire sensors. The maximum current draw per input is 200 mA. The four digital outputs are rated for a load of 2 A each at a supply voltage of DC 24 V. The total load of all outputs must not exceed 6 A. Connections are made via Combicon connectors, ensuring a secure and reliable connection.
Technology Explained Simply
AS-Interface (Actuator-Sensor-Interface) is a fieldbus standard that enables a simple and cost-effective connection between control and decentralized components. The F90 module is responsible for receiving signals from sensors and forwarding control signals to actuators. Communication takes place over a two-wire cable, which simultaneously enables data transmission and power supply (PoE, Power over Ethernet). The IP20 protection rating protects the module against contact with fingers and against solid foreign objects, but not against splashing water or dust – therefore, it is intended for use in enclosed enclosures.
Compatibility and Accessories
The module is part of the AS-Interface system and is compatible with other AS-Interface components from Siemens as well as with devices from other manufacturers that support the AS-Interface standard. This connector set enables a secure and standardized connection of the cables.
Mounting and Installation
Mounting is carried out in an enclosure or control panel. The module is inserted into a suitable mounting rail, taking into account the width of 90 mm. Wiring of inputs and outputs is done via the Combicon connectors. Power supply and data transmission are handled via the AS-Interface cable, which is connected to the module. Installation does not require special tools, but compliance with electrical safety regulations and mounting instructions is mandatory.
Advantages in Operation
The module offers a compact and reliable solution for decentralized connection of sensors and actuators. Use of the AS-Interface standard reduces cabling costs and simplifies commissioning. The clear separation of inputs and outputs, along with defined power supply, facilitates troubleshooting and maintenance. The IP20 protection rating ensures safe operation in enclosed enclosures under normal operating conditions.