Siemens 3RA21100EA151BB4, EAN: 4011209793989

Siemens 3RA2110-0EA15-1BB4 load tap AC400V

Industrial Material > Automation > Frequency converter, soft starter

Siemens 3RA2110-0EA15-1BB4 load tap AC400V

Lieske Part No. 645666
Mfg Part No 3RA21100EA151BB4
EAN-Code 4011209793989
Manufacturer Siemens
Here only 170,68 EUR
203,11 EUR incl. VAT

Further information for Siemens 3RA2110-0EA15-1BB4 load tap AC400V

General
Construction sizeS00
Actuation voltage24 V DC
Rated current range0,28–0,40 A
Operating voltage400 V AC
Short-circuit withstand capability150 kA
Connection systemScrew connection
Mounting methodDIN rail mounting
Assignment type1 and 2
Type of deviceConsumer branch
FunctionDirect starter
SystemSIRIUS 3RA21
ApprovalIEC, UL/CSA
Energy efficiencyIE3/IE4 ready
The Siemens consumer branch type 3RA2110-0EA15-1BB4 is a fuseless direct starter for use in industrial plants. It is designed for protecting and starting electric motors and is part of the SIRIUS series 3RA21. The device is pre-assembled at the factory and consists of a combination of a power switch 3RV2 and a contactor 3RT2, already fully wired and mechanically and electrically connected. The size S00 enables compact mounting on a DIN rail, with the screw connection fulfilling assignment types 1 and 2. Operation is performed via a DC voltage of 24 V, with the rated current range between 0.28 and 0.40 A. The operating voltage is 400 V AC, making it suitable for standard industrial applications.

Direct starter units are designed for direct motor starting, where the motor is connected directly to the mains voltage without any throttling. This consumer branch is designed for use in plants requiring safe and reliable motor control. The combination of power switch and contactor ensures safe operation, as the power switch provides electrical protection and the contactor controls the mechanical switching process. The maximum short-circuit withstand current is 150 kA, enabling use in plants with high short-circuit currents.

Technology explained clearly
The direct starter operates with a 24 V DC control voltage, allowing integration into control systems with 24 V logic. The screw connection technology ensures a secure and durable connection for wiring, while mounting on a DIN rail guarantees fast and standardized installation. Assignment type 2 means the device can also be used in plants with higher requirements for reliability and safety. The combination of power switch and contactor is pre-wired at the factory, reducing installation time and minimizing error sources.

Compatibility and accessories
The device is part of the SIRIUS system building kit and can be combined with various accessories specifically developed for the 3RV2 and 3RT2 series. These include auxiliary switch blocks such as the 3RH2911-1DA11 (side, 1NO+1NC) or the 3RH2911-1DA20 (side, 2NO), which can be used for additional control and signaling functions. Consumer branches for other control voltages and current ranges, such as 3RA2110-0BE15-1AP0 (AC 230 V) or 3RA2110-0DE15-1BB4 (AC 400 V, 0.22–0.32 A), are also available. The optional power supply system SIRIUS 3RV29 significantly reduces wiring effort, especially in plants with multiple consumer branches.

Mounting and installation
Mounting is done on a DIN rail, with the screw connection fulfilling assignment types 1 and 2. The size S00 is designed for compact control panels and allows dense mounting. The pre-wired connection between the power switch and contactor reduces installation time and minimizes error sources. The devices are climate-resistant and globally approved, including according to IEC and UL/CSA standards, ensuring international usability. The 3RA21 consumer branches replace the previous 3RA11 series and are therefore current replacement parts for existing plants.

Advantages in operation
The direct starter provides reliable and low-maintenance motor control. Factory pre-assembly and wiring reduce installation time and increase operational safety. The combination of power switch and contactor ensures safe protection and switching functions. The use of 24 V DC as control voltage allows easy integration into existing control systems. The size S00 and DIN rail mounting ensure space-saving installation in control panels. The devices are IE3/IE4 ready, meaning they are suitable for use with energy-efficient motors.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/645666
qrcode für Siemens 3RA2110-0EA15-1BB4 load tap AC400V