| General |
| Product type | cable set |
| Application | Reversing combinations 3RT1.6 |
| Construction size | S10 |
| Contactor connection type | Rail connection |
| Frame clamp | None |
| Busbar connectors | supply and outgoing side |
| Phase swapping | on outgoing side |
| System | SIRIUS system building block |
The wiring kit 3RA1963-2A from Siemens is a specific accessory for reversing starters of size S10 in the SIRIUS system building kit. It serves the electrical connection between contactor components in reversing combinations of the 3RT1.6 series and enables correct phase distribution in the connection area. The kit is designed for contactors with rail connection, where no frame terminal is present. The connection rails are provided on both input and output sides, with phase swapping occurring on the output side to ensure the necessary direction change for drives.
Reversing combinations are common in industrial electrical engineering when motors need to operate in both directions. The wiring kit 3RA1963-2A supports this application by providing a structured and secure connection between individual contactor components. The connection is made via standardized rails directly attached to the contactors, ensuring a compact and reliable installation.
Contactor with rail connection is the specific design for which this wiring kit is intended. This design requires no additional frame terminals, as electrical connections are made directly via the rails. This reduces installation time and minimizes error sources during setup. The rails are dimensioned to safely transmit the required current levels without causing thermal or mechanical stress.
SIRIUS system building kit is the product family from Siemens that offers modular and standardized components for industrial controls and drives. The wiring kit 3RA1963-2A is an integral part of this system, as it supports the modularity and expandability of installations. The components are designed to be easily combined without requiring additional adjustments or tools.
Size S10 refers to the mechanical dimensioning of the contactor for which the wiring kit is designed. This size is common in industrial automation and corresponds to a specific rated current range and defined mounting geometry. The connection rails are dimensioned accordingly to ensure a secure and precise fit during installation.
The use of the wiring kit 3RA1963-2A is exclusively for reversing starters of the 3RT1.6 series. The rails enable the necessary electrical connection between individual contactor components, with phase distribution on the output side designed to allow switching of the connected motor’s rotation direction. This is particularly relevant in applications requiring bidirectional movement, such as conveyor belts, machine tools, or pumps.
Installation is performed by directly connecting the rails to the contactors. Since no frame terminals are present, installation is aligned with the rail connection design of the contactors. The rails are constructed to ensure a secure electrical connection and simultaneously support the mechanical stability of the installation. The connection is made without additional tools or adapters, reducing installation time and minimizing error potential.
Operation of the wiring kit occurs within the electrical control of the reversing combination. The rails transmit electrical power and control signals between contactor components. The design ensures safe transmission of required electrical loads without overheating or contact loss. Use in reversing starters of size S10 ensures that both mechanical and electrical requirements of the application are met.
Reversing starters are special contactor configurations that enable an electric motor to operate in both directions. The wiring kit 3RA1963-2A is essential for this, as it establishes the necessary connections between individual contactor components. Phase distribution on the output side allows the motor’s rotation direction to be switched without requiring additional components or complex circuits.
Compatibility of the wiring kit is limited to reversing starters of the 3RT1.6 series and size S10. It is not intended for other contactor types or sizes. Use in other configurations may result in malfunction or damage. The connection rails are specifically designed for the rail connection design, ensuring direct and secure installation.
SIRIUS system components are designed to be combined modularly. The wiring kit 3RA1963-2A is a specific accessory that extends the functionality of reversing combinations. Its use in the SIRIUS system building kit enables standardized and reliable integration into existing installations. The components are designed for industrial environments and meet required safety and performance standards.
Installation is performed by directly connecting the rails to the contactors. No additional tools or adapters are required. The rails are constructed to ensure a secure electrical connection and simultaneously support the mechanical stability of the installation. The connection is made without additional tools or adapters, reducing installation time and minimizing error potential.
Operation of the wiring kit occurs within the electrical control of the reversing combination. The rails transmit electrical power and control signals between contactor components. The design ensures safe transmission of required electrical loads without overheating or contact loss. Use in reversing starters of size S10 ensures that both mechanical and electrical requirements of the application are met.
Reversing combinations are common in industrial electrical engineering when motors need to operate in both directions. The wiring kit 3RA1963-2A supports this application by providing a structured and secure connection between individual contactor components. The connection is made via standardized rails directly attached to the contactors, ensuring a compact and reliable installation.
Contactor with rail connection is the specific design for which this wiring kit is intended. This design requires no additional frame terminals, as electrical connections are made directly via the rails. This reduces installation time and minimizes error sources during setup. The rails are dimensioned to safely transmit the required current levels without causing thermal or mechanical stress.
SIRIUS system building kit is the product family from Siemens that offers modular and standardized components for industrial controls and drives. The wiring kit 3RA1963-2A is an integral part of this system, as it supports the modularity and expandability of installations. The components are designed to be easily combined without requiring additional adjustments or tools.
Size S10 refers to the mechanical dimensioning of the contactor for which the wiring kit is designed. This size is common in industrial automation and corresponds to a specific rated current range and defined mounting geometry. The connection rails are dimensioned accordingly to ensure a secure and precise fit during installation.
The use of the wiring kit 3RA1963-2A is exclusively for reversing starters of the 3RT1.6 series. The rails enable the necessary electrical connection between individual contactor components, with phase distribution on the output side designed to allow switching of the connected motor’s rotation direction. This is particularly relevant in applications requiring bidirectional movement, such as conveyor belts, machine tools, or pumps.
Installation is performed by directly connecting the rails to the contactors. Since no frame terminals are present, installation is aligned with the rail connection design of the contactors. The rails are constructed to ensure a secure electrical connection and simultaneously support the mechanical stability of the installation. The connection is made without additional tools or adapters, reducing installation time and minimizing error potential.
Operation of the wiring kit occurs within the electrical control of the reversing combination. The rails transmit electrical power and control signals between contactor components. The design ensures safe transmission of required electrical loads without overheating or contact loss. Use in reversing starters of size S10 ensures that both mechanical and electrical requirements of the application are met.
Reversing starters are special contactor configurations that enable an electric motor to operate in both directions. The wiring kit 3RA1963-2A is essential for this, as it establishes the necessary connections between individual contactor components. Phase distribution on the output side allows the motor’s rotation direction to be switched without requiring additional components or complex circuits.
Compatibility of the wiring kit is limited to reversing starters of the 3RT1.6 series and size S10. It is not intended for other contactor types or sizes. Use in other configurations may result in malfunction or damage. The connection rails are specifically designed for the rail connection design, ensuring direct and secure installation.
SIRIUS system components are designed to be combined modularly. The wiring kit 3RA1963-2A is a specific accessory that extends the functionality of reversing combinations. Its use in the SIRIUS system building kit enables standardized and reliable integration into existing installations. The components are designed for industrial environments and meet required safety and performance standards.
Installation is performed by directly connecting the rails to the contactors. No additional tools or adapters are required. The rails are constructed to ensure a secure electrical connection and simultaneously support the mechanical stability of the installation. The connection is made without additional tools or adapters, reducing installation time and minimizing error potential.
Operation of the wiring kit occurs within the electrical control of the reversing combination. The rails transmit electrical power and control signals between contactor components. The design ensures safe transmission of required electrical loads without overheating or contact loss. Use in reversing starters of size S10 ensures that both mechanical and electrical requirements of the application are met.