| General |
| Degree of protection | gG |
| Nominal voltage | 500 V AC |
| Rated current | 6 A |
| System | SENTRON cylinder fuse system |
| Standards | IEC 60269-1, -2, -3; UL 512 |
| Approval | fuse disconnect switch |
| Application area | industrial plants, selective plant protection |
The Siemens cylindrical fuse insert type 3NW6001-1 is a component of the SENTRON cylindrical fuse system, designed for selective plant protection in industrial installations. It serves as protection for electrical components and switchgear, particularly for semiconductor components, and is used in conjunction with suitable fuse holders. The fuse is rated for a nominal voltage of 500 V AC and has a nominal current rating of 6 A. The designation gG indicates a general protection function, suitable for use in networks with high short-circuit currents.
Applications
The cylindrical fuse insert 3NW6001-1 is intended for use in industrial electrical installations, particularly in systems requiring high reliability and selectivity in the event of a fault. It is commonly used in switchgear, control systems, and installations with semiconductor components, where precise disconnection is required in case of overload or short circuit. The fuse is tested and approved in Europe as a fuse disconnect switch, enabling its use in standardized installations.
Functions and Features in Detail
The fuse is designed as a cylindrical fuse with dimensions 10x38 mm, representing a standard size in the industrial sector. The designation gG means it is suitable for protecting lines and equipment in networks with high short-circuit currents. The fuse is not intended for switching under load; for such applications, Siemens offers alternative products such as the 3KF series. The fuse is part of a system that enables rapid detection of a blown fuse, with the LED indicator in the fuse holder (not in the insert element itself) flashing once the fuse has blown.
Technology Explained Simply
The cylindrical fuse 3NW6001-1 operates on the principle of thermal and electromagnetic disconnection. In the event of an overcurrent or short circuit, the fuse link inside the fuse melts, interrupting the circuit. The designation gG guarantees reliable disconnection even at high short-circuit currents. The nominal voltage of 500 V AC defines the maximum voltage at which the fuse can be safely operated. The dimension 10x38 mm allows use in standard SENTRON fuse holders.
Compatibility and Accessories
The fuse insert is suitable for use in various SENTRON fuse holders, including models such as 3NW7024-4, 3NW7431, 3NW7023-4, 3NW7033-1, 3NW7034-1, 3NW7013-4, and 3NW7014-4. These holders are designed for different applications such as photovoltaic systems or 3-pole circuits. Combining it with a fuse holder that includes an LED indicator enables visual detection of a blown fuse. For replacing the fuse, a fuse tongs (e.g. 3NC1000) is recommended to ensure safe handling.
Installation and Mounting
Mounting is done by inserting the fuse insert into a compatible SENTRON fuse holder. The holders are typically mounted in switchboards or distribution units. The fuse is not intended for switching under load; therefore, the circuit must be de-energized before inserting or removing the fuse. Installation must follow the specifications of the respective fuse holder and applicable standards.
Operational Advantages
Using the cylindrical fuse insert 3NW6001-1 provides high reliability in fault situations, as it complies with standards IEC 60269-1, -2 and -3, as well as UL 512. Standardization enables worldwide use. The rapid detection of a blown fuse via the LED indicator in the holder (not in the insert element) reduces fault diagnosis time. The possibility to store spare fuses in the holder enables quick replacement without additional preparation time.
Standards and Approvals
The fuse complies with international standards IEC 60269-1, -2 and -3, which define requirements for cylindrical fuses. Additionally, it is certified according to UL 512, enabling its use in countries with UL requirements. In Europe, it is tested and approved as a fuse disconnect switch, legitimizing its use in standardized industrial installations.