| General |
| Primary rated current | 150 A |
| Secondary current | 5 A |
| Accuracy class | 0,5 |
| Calibration | calibrated |
| Compatibility | fuse disconnectors 3NJ41, size NH00 |
The article 3NJ4915-1FB11 from Siemens is an integrable current transformer, specifically designed for use with fuse switch disconnectors of the 3NJ41 group in the NH00 size class. It serves as an accessory component for SENTRON protective switching devices and enables precise measurement of alternating current in industrial installations. The current transformer is rated for a nominal current of 150 amperes and delivers a secondary current of 5 amperes, allowing it to be used in electrical circuits for current measurement and monitoring. The accuracy class 0.5 ensures high measurement accuracy, which is required for applications in energy distribution and monitoring. The current transformer is calibrated, meaning it has been adjusted and certified according to applicable standards to ensure the required measurement accuracy.
Applications
The current transformer 3NJ4915-1FB11 is designed for use in industrial electrical installations, particularly in switchgear equipped with fuse switch disconnectors of the 3NJ41 group. It is typically used in distribution switchgear, machine controls, or energy distribution systems where precise current measurement is necessary. Integration into the bar allows for compact and secure mounting, minimizing space requirements and enhancing electrical safety. Use in the NH00 size class makes it suitable for installations with medium to high current loads.
Functions and Equipment in Detail
The current transformer is designed as an integrable module that is directly installed into the 3NJ41 fuse switch disconnector. It features a primary nominal current of 150 A and delivers a secondary current of 5 A, which represents a standard configuration for current transformers in industrial installations. The accuracy class 0.5 means that the deviation of measured values from the actual value is at most 0.5 %, which is sufficiently precise for many industrial applications. Calibration of the device ensures that the measured values are verifiable and traceable, which is particularly important in monitored or regulated installations.
Technology Explained Simply
A current transformer such as the 3NJ4915-1FB11 transforms a high primary current into a lower secondary current that can be safely and easily measured. The primary winding is directly integrated into the conductor cross-section of the bar, while the secondary winding supplies the transformed current to measuring instruments or protection systems. The design allows for direct mounting into the bar, eliminating the need for additional fastening elements or cable connections. Calibration is performed according to applicable standards to ensure the reliability of the measured values.
Compatibility and Accessories
The current transformer is specifically designed for fuse switch disconnectors of the 3NJ41 group in the NH00 size class. It is therefore only compatible with these bars and cannot be used in other groups or size classes. Integration is achieved by direct installation into the bar, ensuring a secure and stable connection.
Mounting and Installation
Installation is performed by inserting the current transformer into the designated position within the 3NJ41 fuse switch disconnector. The installation requires no additional tools or fastening elements, as the transformer is mechanically hung or slid into the bar. The electrical connection is made via the integrated primary winding, which is directly connected to the conductor cross-section of the bar. The secondary side is connected to measuring instruments or protection systems, with wiring carried out according to electrical circuit diagrams and safety regulations.
Advantages in Operation
The integrated installation of the current transformer into the bar reduces space requirements and simplifies mounting. The high accuracy class 0.5 and calibration ensure reliable measurement values, which are important for monitoring and controlling electrical installations. Use in the NH00 size class makes it suitable for a wide range of industrial applications, particularly in switchgear with medium to high current loads. Compatibility with Siemens SENTRON protective switching devices ensures a uniform system architecture and simplifies maintenance and servicing.