Siemens 3NH6230, EAN: 4047624577576

Siemens 3NH6230 NH fuse base ceramic 1p 250 A

Installation > Securing material > NH fuses and accessories

Siemens 3NH6230 NH fuse base ceramic 1p 250 A

Lieske Part No. 157016
Mfg Part No 3NH6230
EAN-Code 4047624577576
Manufacturer Siemens
Here only 147,42 EUR
175,43 EUR incl. VAT

Further information for Siemens 3NH6230 NH fuse base ceramic 1p 250 A

General
Construction size1 -
Number of poles1 -
Nominal current250 A
Operating voltage690 V
Maximum operating voltage1000 V
MaterialSteel/ceramic -
Connection typeflat connection -
Mountingscrew or snap mounting -
CompatibilityNH fuse inserts size 1 -
The Siemens NH fuse base 3NH6230 is a 1-pole component of size 1, specifically designed for use in electrical switchgear to accommodate NH fuse inserts. It serves as a mechanical and electrical carrier for fuse inserts in the SENTRON system and enables secure integration into switchgear, distributors or enclosures. The base is made of a composite material of steel and ceramic, ensuring high mechanical stability and thermal resistance. The ceramic component provides reliable insulation and protects against arc flash, especially during switching operations in overload or short-circuit conditions.

Applications
This fuse base is intended for applications in industrial and commercial electrical installations where reliable protection of circuits is required. It can be used in switchgear with operating voltages up to 1000 V AC/DC. The design is intended for use in enclosures mounted on DIN rail, with fastening either by screw or snap connection. The 1-pole configuration is suitable for single circuits or as part of a multi-pole system.

Functions and Equipment in Detail
The base provides a flat connection, ensuring a secure and conductive connection to the supply cable. The maximum rated current is 250 A, with fuse inserts selected according to the desired protection characteristic. Size 1 corresponds to the standard for medium to high power requirements in industrial installations. The use of ceramic as insulating material ensures high electrical strength and heat resistance, increasing the service life and safety.

Technology Explained Simply
The ceramic construction of the fuse base provides high insulation performance, which remains stable under high current and thermal loads. The combination of steel and ceramic ensures mechanical strength, which remains intact even after frequent mounting and dismounting operations. The flat connection design allows for easy and secure connection to cables, with the contact surface ensuring low transition resistance. Mounting on the DIN rail is done either by screws or by snap mechanism, depending on the switchgear requirements.

Compatibility and Accessories
The fuse base 3NH6230 is compatible with a wide range of NH fuse inserts of size 1, including models such as 3NE12250, 3NE3225, 3NE1227-2, 3NE12270, 3NE3227, 3NE3224, 3NE3222, 3NE3221, 3NE8221-0MK, 3NE8222-0MK, 3NE8224-0MK, 3NE8225-0MK, 3NE8227-0MK, 3NE3218-0MK, 3NE8221-3MK, as well as SITOR dual-function fuses. The fuse inserts can be equipped with operating classes gR, gS, aR or special functions such as semiconductor protection, depending on the application. Additionally, NH disconnectors such as 3NP1944-1MA20 or 3NG1202 are available for safe disconnection of circuits.

Mounting and Installation
Mounting is done on a standard DIN rail (DIN rail) within an enclosure. Fastening can be done by screws or by snap mechanism, with the respective method selected according to the switchgear configuration. Connection to the supply cable is made via the flat connection, with cable cross-sections complying with respective standards and maximum current load. Installation requires no additional tools or components, as the base is standardized and designed for direct mounting.

Advantages in Operation
The fuse base provides high reliability and safety in operation, ensuring circuit protection in industrial installations. The ceramic insulation minimizes the risk of sparking and increases the service life of the component. The 1-pole configuration allows flexible integration into existing switchgear, with the use of standard fuse inserts simplifying maintenance and replaceability. Compatibility with various fuse types and easy mounting on DIN rail make this component a universally applicable part in electrical installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/157016
qrcode für Siemens 3NH6230 NH fuse base ceramic 1p 250 A