Further information for Siemens 3NA6822 Fuse Isolated Handle 63A
General
Construction size
NH000
Nominal current
63 A
Degree of protection
gL/gG
Nominal voltage AC
500 V
Nominal voltage DC
250 V
Handle bottles
Insulated
Combined detector
The Siemens NH fuse insert type 3NA6822 is a component for selective line and system protection in the field of electrical installation technology. It belongs to the SENTRON series and is designed in size NH000, with a rated current of 63 A. The fuse is designed for use in alternating and direct current systems, with a rated voltage of 500 V AC and 250 V DC. The designation gG refers to the protection type, intended for general device protection, including short-circuit and overload protection. The fuse features a combination indicator, which signals the fuse's disconnection by a clear color change from red to white. The insulated handle caps allow for safe handling, especially during maintenance or when inserting and removing the fuse.
Applications
This fuse insert is intended for use in industrial and commercial electrical installations where reliable protection against overloads and short circuits is required. It is used in switchgear, distribution boxes, or other switching devices equipped with NH fuse systems. Size NH000 is suitable for small to medium power applications and is commonly used in systems with lower current ratings. The fuse is designed for indoor use, with environmental conditions meeting the requirements of applicable standards.
Functions and Equipment in Detail
The fuse is equipped with a combination indicator that visually displays the fuse's status. When tripped due to overload or short circuit, the indicator changes from red to white, enabling quick identification of failure. The insulated handle caps protect the operator from electrical contact and facilitate safe insertion and removal. The fuse is designed for use in alternating and direct current systems, with a rated voltage of 500 V for AC and 250 V for DC. The rated current of 63 A is suitable for applications with medium loads.
Technology Explained Simply
The fuse operates on the principle of thermal and electromagnetic disconnection. During an overload, the fuse element heats up and melts, interrupting the circuit. In the case of a short circuit, the current increases suddenly, causing the fuse element to melt and disconnect the circuit. The designation gG means the fuse is suitable for general device protection, including protection against short circuits and overloads. Size NH000 is a standard size in the NH fuse system and is used in many switchgear installations.
Compatibility and Accessories
The fuse insert is compatible with other sizes in the NH fuse system, particularly sizes 000, 00, 0, 1, 2, 3, 4, and 4a. It can be installed in switchgear and distribution boxes designed for NH fuses. Suitable accessories include additional NH fuse inserts in various rated currents and sizes, for example from 2 A to 1250 A, as well as fuses with combination indicators and insulated handle caps. The fuse is part of Siemens' SENTRON system and can be combined with other SENTRON products.
Mounting and Installation
Installation is carried out in a suitable switching device or distribution box designed for NH fuses. The insulated handle caps facilitate safe insertion and removal. The fuse must be inserted into the designated holder, ensuring correct alignment and locking. Installation must comply with applicable standards and regulations for electrical installations. The fuse is intended for indoor use, with environmental conditions meeting the requirements of applicable standards.
Operational Advantages
The fuse provides reliable protection against overloads and short circuits, safeguarding personnel, devices, and systems. The combination indicator allows for quick identification of the tripped state, simplifying maintenance work. The insulated handle caps increase safety during handling. The fuse is designed for use in alternating and direct current systems, making it suitable for various applications. Size NH000 is a standard size used in many switchgear installations, enhancing compatibility.