Further information for Siemens 3KC9501-2 power switch yellow/red with cover
General
Accessory type
Direct on drive
Colour scheme
yellow/red
Compatibility
3KC0 size 5, 3- and 4-pole
Number
1 piece
Cover
The article 3KC9501-2 from Siemens is an accessory for network switches of size 5 from the SENTRON series. It is a direct drive in yellow/red with integrated cover, specifically designed for 3- and 4-pole installations. This accessory serves to extend and adapt existing network switches to match specific requirements in industrial or commercial applications.
Applications
The direct drive 3KC9501-2 is used in electrical installations where mechanical operation of the network switch is required. It is designed for 3- and 4-pole circuits commonly found in power distribution, machine control, or process automation. The yellow/red colouring provides visual identification and facilitates operation, especially in complex switchgear. The integrated cover protects the drive from mechanical impacts and prevents unintended actuation.
Functions and Equipment in Detail
The drive enables direct mechanical operation of the network switch, ensuring safe and precise switching operations. The yellow/red colouring acts as a visual signal indicating the operational state (e.g. on/off). The cover provides additional protection, particularly in environments with high mechanical stress or in open switchgear. The accessory is designed for size 5 of the SENTRON series, ensuring standardisation and compatibility with corresponding switches.
Technology Explained Simply
A direct drive transfers operating force directly to the switch mechanism without requiring additional gears or levers. This results in reliable and maintenance-friendly operation. The yellow/red colouring is common in electrical engineering to visually indicate the state of a switch – yellow often denotes ready" or "in operation", red denotes "off" or "faulty. The cover prevents accidental operation and increases operational safety.
Compatibility and Accessories
Accessory 3KC9501-2 is specifically designed for network switches of size 5 from the SENTRON series (type 3KC0). It is compatible with 3- and 4-pole versions. Suitable network switches that can be combined with this drive include, for example, models 3KC0450-0RE00-0AA0 (4-pole, 1000A), 3KC0350-0RE00-0AA0 (3-pole, 1000A), 3KC0352-0RE00-0AA0 (3-pole, 1250A), 3KC0354-0RE00-0AA0 (3-pole, 1600A), 3KC0452-0RE00-0AA0 (4-pole, 1250A), and 3KC0454-0RE00-0AA0 (4-pole, 1600A). These combinations allow flexible adaptation to different loads and switching requirements.
Installation and Mounting
Mounting is done directly onto the network switch of size 5. The drive is attached at the designated position, ensuring a secure and stable mechanical connection to the switch mechanism. The cover is also mounted directly onto the drive. Installation requires no additional tools or components, as the accessory is designed for standard mounting in the SENTRON series. Detailed mounting instructions are included in the technical documentation for the respective switch models.
Operational Advantages
Using the direct drive 3KC9501-2 improves the operability and safety of network switches. The clear visual identification provided by the yellow/red colouring simplifies state monitoring, especially in complex installations. The integrated cover protects against accidental actuation and reduces the risk of misoperation. Compatibility with various 3- and 4-pole switches enables flexible use and retrofitting of existing installations without replacing the entire switch.