Siemens 1FL21042AF011HC0, EAN: 4034106450748

Siemens 1FL2104-2AF01-1HC0 servo motor 400 V 3 AC

Industrial Material > Engines and accessories

Siemens 1FL2104-2AF01-1HC0 servo motor 400 V 3 AC

Lieske Part No. 642848
Mfg Part No 1FL21042AF011HC0
EAN-Code 4034106450748
Manufacturer Siemens
Here only 493,43 EUR
587,18 EUR incl. VAT

Further information for Siemens 1FL2104-2AF01-1HC0 servo motor 400 V 3 AC

General
Nominal power0,75 kW
Rated speed3000 U/min
Supply voltage400 V
Degree of protectionIP65
Shaft height40 mm
Torque (rated)2,4 Nm
Torque (maximum)2,4 Nm
Overload capability350 %
Rotor inertialow
Plug connectionHybrid connector AS17bit
Tolerance classN
Hold brakeNone
Wave springYes
Oil sealYes
The Siemens servomotor type 1FL2104-2AF01-1HC0 belongs to the SIMOTICS S-1FL2 product family and is designed for use in industrial drive systems. It is specifically designed for operation with SINAMICS S200 servo inverters and is characterised by high accuracy and reliability. The motor has a rated power of 0.75 kW at a rated speed of 3000 rpm and is designed for a supply voltage of 400 V 3AC. It is supplied with a shaft height of 40 mm, making it suitable for standard mounting configurations in manufacturing technology.

Applications

The servomotor is intended for applications in automated manufacturing, such as in CNC machines, robotic systems or positioning drives. The high accuracy and overload capacity up to 350 % enable efficient handling of torque peaks, increasing productivity in dynamic processes. The protection class IP65 makes the motor suitable for use in outdoor environments or humid conditions, as it is dust-tight and splash-proof.

Functions and equipment in detail

The motor features a hybrid connector AS17bit, ensuring a secure and reliable electrical connection to the drive system. The shaft is equipped with a shaft key, enabling a precise and torque-stable connection to drive accessories. The shaft tolerance class N ensures an accurate fit. The motor is supplied without a holding brake, which is relevant for applications with continuous motion or when external braking systems are used. The integrated oil seal protects the bearings and prevents dirt or moisture from entering.

Technology explained simply

The rotor inertia of the motor is in the range of the S-1FL21 series, corresponding to low inertia. This enables a fast response to control commands and precise positioning, especially in applications with high dynamic requirements. The rated and maximum torques are each 2.4 Nm, ensuring stable and controlled motion. The overload capacity of 350 % means the motor can briefly handle loads up to three times the rated torque without damage. The protection class IP65 ensures the motor is protected against dust and splashing water, making it suitable for industrial environments with higher requirements for ambient conditions.

Compatibility and accessories

The motor is specifically developed for use with SINAMICS S200 servo inverters and operates optimally in combination with these drive systems. The use of SINAMICS products enables a comprehensive drive solution characterised by high integration depth and communication capability. The hybrid connector AS17bit is a standard in Siemens drive technology and ensures reliable and quick installation.

Mounting and installation

Mounting is carried out via the specified shaft height of 40 mm, with the shaft key enabling a secure mechanical connection to drive accessories. The electrical connection is made via the hybrid connector AS17bit, which is connected directly to the servo inverter. The IP65 protection class requires no additional protective measures during installation, provided ambient conditions remain within the specified limits.

Advantages in operation

The motor offers high operational safety due to its robust construction and integrated oil seal. The high accuracy and fast dynamics, thanks to low rotor inertia, enable precise positioning and reduce cycle times in automated processes. Compatibility with SINAMICS S200 drives ensures easy integration into existing control systems and enables central control and diagnostics across the entire drive chain.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/642848
qrcode für Siemens 1FL2104-2AF01-1HC0 servo motor 400 V 3 AC