Further information for Siemens 1FK2210-4AB01-1MA0 servo motor 40 Nm IP65
General
Degree of protection
IP65
Rated torque
40 Nm
Nominal power
5,4 kW
Rated speed
1500 U/min
Operating voltage
380-480 V
Rated power at 200-240V
3,05 kW
Rated speed at 200-240V
750
Shaft
D38x80mm
Absolute value transducer
22bit + 12bit multiturn
Encoder
AM22DQC
Interface
OCC
Connector
M23
Motor variant
Compact
Compatibility
SINAMICS S210
Shaft with keyway
Rotatable connector
The Siemens SIMOTICS S-1FK2 CT servomotor, type 1FK2210-4AB01-1MA0, is a compact, high-dynamic synchronous motor for industrial motion control applications. It features high power density, overload capability, and protection class IP65, making it suitable for environments with increased requirements for dust and splash water protection. The motor is designed in the Compact variant, intended for precise and stable control with medium to large moving masses. It is used in combination with the SINAMICS S210 frequency converter and supports the One Cable Connection (OCC) technology, enabling simplified cabling and fast commissioning.
Applications
The servomotor is designed for a wide range of industrial applications, particularly in machine building, packaging technology, machine tools, and automation systems. Its high dynamics and precise positioning make it especially suitable for drives requiring short settling and positioning times. The IP65 protection class allows use in environments with splash water, dust, or light contamination, for example in the food industry or outdoor applications.
Functions and Equipment in Detail
The motor features an absolute encoder with 22 bit + 12 bit multiturn (encoder AM22DQC), enabling precise position detection even after power failure. The shaft has a diameter of 38 mm and a length of 80 mm, with a keyway for secure connection to the drive shaft. The OCC interface with a rotatable M23 connector enables a flexible and robust connection to the frequency converter. The motor power is 5.4 kW at 1500 rpm with operating voltages of 380–480 V, and 3.05 kW at 750 rpm with 200–240 V. The rated torque is 40 Nm.
Technology Explained Simply
The One Cable Connection (OCC) technology combines power supply, control signals, and position data in a single cable, simplifying installation and reducing the number of connections. The absolute encoder provides a unique position reading without requiring a homing run, reducing start-up time and increasing operational safety. The IP65 protection class means the motor is dust-tight and protected against splashing water from all directions, making it suitable for demanding industrial environments.
Compatibility and Accessories
The motor is designed for use with the SINAMICS S210 frequency converter. Suitable accessories include motor protection switches such as the 3RV2021-4EA10, NH fuses size 000 (e.g. 3NA3822), industrial Ethernet cables such as 6XV1870-3QE50 or 6XV1870-3QE30, and EMC filters such as 6SL3203-0BE23-5HA0 or 6SL3203-0BE26-5HA0. These components support the safe and interference-free operation of the drive system.
Mounting and Installation
Mounting is done via the designated shaft height, which is not explicitly stated in model 1FK2210-4AB01-1MA0 but is available in the SIMOTICS S-1FK2 series product range from 20 to 100 mm. The shaft is equipped with a keyway, ensuring a secure mechanical connection. The OCC connection is implemented via the rotatable M23 connector, allowing flexible positioning. Cabling is done via the OCC cable, which transmits power, control, and position data.
Operational Advantages
The motor offers short settling and positioning times, stable control at high dynamics, and fast disturbance rejection. The high overload capability allows short-term load peaks without damage. The absolute encoder function reduces start-up time, as no homing run is required. The IP65 protection class increases operational safety in dirty or moist environments. The combination with the SINAMICS S210 system enables efficient and reliable drive control.