Wall fan with sound insulation and heat recovery

Single room air handling unit for simultaneous aeration and ventilation of rooms with the following additional features:

Suitable for exterior wall construction or for recessed installation into the outer wall.

Air promotion by separate fan units over split pipe socket with integrated electronically controlled shutter unit and adapater for wall thicknesses up to 425 mm.

Weather protection installable without additional mechanical fasteners.

Sound insulation: Dn, e, w = 52 dB

Air power each and venting:

Level I about 29 m3 / h at Ln = 24 dB (A)
Level II about 41 m3 / h at Ln = 30 dB (A)
Level III 70 m3 / h at Ln = 41 dB (A)

Power consumption:

Level I 10 Watts
Level II 14 Watts
Level III 29 Watts


Electrical connection: 230 V / 0.17 A

Class II: Insulation

Building supervisory approval (DIBt)

For maintenance purposes, a safety circuit is also installed.
With the front panel removed a safety switch disconnects the internal power supply.
With integrated heat exchanger for heat recovery in winter-fresh air operation.
Heat recovery rate max. 66%.
With built-layer synthetic composite filters, filter class F7.

Make:

SIEGENIA AUBI AEROLIFE

Core hole with a diameter of 120mm required!