DoorCom
DoorCom analog, 6-grid switch panel housing. The new, universal a / b interface connects the door of Siedle in-house telephony with the office telephony. It must be connected (by TBR-21) or the corresponding output of a PBX always normalized to the a / b-sections instead of the telephone network. With two-line alphanumeric display, 16 characters per line, 6 buttons for easy configuration. It behaves as a system telephone.
There is the analog CoorCom for the YR system bus and for the 1 + n system.
DCA 650 - ... YR for the system bus
DCA 612 - ... for the 1 + n door phone system

Note:

The possible use of individual features may vary depending on the TC system. Please check with the manufacturer of your PBX.

Common Features of DoorCom Analog DCA 612 - ... and DCA 650 - ...
System functions openers and light by DTMF
Doormatic function for call input 1, with / without prior Türrufsignalisation
following calling options are assigned (each max. 22 digits).
Direct calls
- Selective user
- Group calls (depending on existing PABX)
- All Calls (depending on existing PABX)
- Calls to extensions, to office and mobile phones
Chain calls
- On no answer, on busy
Diverting calls to your central point (Concierge)
Day and night function to alternative call destinations (depending on existing PABX)
Pharmacy line
Several DCAs possible in an intercom system or to a PBX
Call and call duration adjustable
Signaling of door calls prior to call acceptance
Call differentiation for doors or call inputs (max. 2) by identifying tone after lifting the handset
PIN protection activation eg for programming, door, switching functions and function activation
A Timed
Type: DCA 612-0
Quantity: 1 unit.