SICK 6034575

SICK 6034575 DSL-8U04G10M025KM1 connection cable M8x4p/USB-A 10 m

Industrial Material > Control devices / Pilot devices > Photoelectric / optical sensors / Ultrasound

SICK 6034575 DSL-8U04G10M025KM1 connection cable M8x4p/USB-A 10 m

Lieske Part No. 567795
Mfg Part No 6034575
EAN-Code
Manufacturer SICK
Here only 106,79 EUR
127,08 EUR incl. VAT

Further information for SICK 6034575 DSL-8U04G10M025KM1 connection cable M8x4p/USB-A 10 m

General
Connection type at end AConnector, M8, 4-pole, straight
Connection type head BPlug, USB-A, straight
Cable length10 m
Number of cores4
Insulating materialPVC
Shieldingunshielded
FunctionRS-232 to USB converter
ApplicationSensor configuration via PC
The connection cable DSL-8U04G10M025KM1 from SICK is used for communication between a sensor with a configuration connector and a PC. The product connects an M8 plug, 4-pole, straight, with a USB-A plug, also straight, over a cable length of 10 meters. The cable is 4-core, made of PVC, and unshielded. At its core, it enables the transmission of configuration data by integrating a converter that transforms the RS-232 signal standard into the USB protocol. This allows a sensor equipped with an M8 connector and an RS-232 interface to be directly connected to a computer for making settings or retrieving status information.

Connection cable for sensor configuration

The cable is specifically designed for connecting industrial sensors to a PC via the USB interface. The connection to the sensor is made using a standardized M8 plug with 4 contacts, which is widely used in industrial automation. At the PC end, a USB-A plug is used, which is typically available on most modern computers. The 10-meter-long cable provides sufficient reach for most application scenarios in manufacturing or machine building. The PVC insulation offers adequate protection against mechanical stress and environmental influences in typical industrial environments.

The integrated converter in the cable converts the serial RS-232 signal, used by many industrial sensors, into a USB signal that can be processed by modern computers. This relieves the user from needing additional interface adapters or external converter circuits. The unshielded design of the cable is suitable for environments where there are no strong electromagnetic interference sources. In environments with high interference, this may lead to signal distortion, so in such cases a shielded variant is recommended — although this is not part of this product version.

The connection cable is compatible with sensors that feature an M8 connector with an RS-232 interface. It is typically used in conjunction with configuration software installed on the PC to adjust parameters such as sensitivity, output logic, or diagnostic functions of the sensor. The connection is made directly via the computer’s USB interface, without additional hardware.

Installation is done by simply plugging the M8 connector into the sensor’s port and the USB-A connector into a free USB port on the computer. No additional tools or configuration steps are required. The cable is designed for direct use, with the connection remaining stable as long as the connectors are not damaged. The PVC insulation provides sufficient mechanical protection, although no specific protection rating such as IP67 or similar is specified, so the cable is not recommended for use in damp or dusty environments unless the entire installation is adequately protected.

The connection cable enables quick and direct sensor configuration without additional adapters or external converters. The 10-meter length offers flexibility in positioning the sensor and PC. The use of a USB connector instead of a serial port simplifies connection to modern computers, which often no longer have serial interfaces. The unshielded design reduces weight and cost, but is only suitable for environments where no strong electromagnetic interference occurs.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/567795
qrcode für SICK 6034575 DSL-8U04G10M025KM1 connection cable M8x4p/USB-A 10 m