| General |
| Thread diameter (housing) | M4 |
| Material, fibre | Plastic |
| Material, sheath | Plastic |
| Material, light guide head | Stainless steel |
| Function principle | consisting of a transmitter and a receiver |
| Compatibility | GLL170(T), WLL180T, WLL24 Ex, WLL80 |
The LL3-TB01 optical fibre from SICK is a one-way system consisting of a transmitter and a receiver, specifically designed for use with optical fibre sensors such as GLL170(T), WLL180T, WLL24 Ex and WLL80. The device serves as optical sensor accessory, enabling signal transmission over a defined distance, with the optical fibre length being 2,000 mm. The construction is designed for industrial environments, with the fibre and sheath made of plastic, while the fibre head is made of stainless steel to resist corrosion and mechanical stress. The housing thread diameter is M4, enabling standardised mounting on compatible sensors.
Applications
The LL3-TB01 is used in systems where optical signal transmission over a defined distance is required, for example in automation technology, positioning applications, or as part of safety and monitoring systems. The long range of 2,000 mm allows flexible placement of sensor units, with the optical fibre acting as the connecting element between transmitter and receiver. Use in combination with the specified SICK sensors ensures compatible and reliable signal transmission.
Functions and Equipment in Detail
The system consists of two components: a transmitter and a receiver, each equipped with a stainless steel fibre head. The fibre and sheath are made of plastic, providing sufficient mechanical stability and flexibility. The fibre length of 2,000 mm enables long-range signal transmission, with the connection made via the optical fibre cable. Mounting is achieved via an M4 thread, ensuring secure attachment to compatible sensors.
Technology Explained Simply
The LL3-TB01 optical fibre utilises the principles of optical signal transmission, where light pulses are guided through the fibre. The transmitter generates a light signal, which is transmitted via the optical fibre to the receiver. The plastic fibre ensures efficient light transmission, while the stainless steel head provides mechanical strength and corrosion resistance. The length of 2,000 mm allows flexible sensor arrangement without compromising signal quality. Connection is made via the M4 thread, enabling standardised and secure mounting on compatible SICK sensors.
Compatibility and Accessories
The LL3-TB01 is specifically designed for use with optical fibre sensors GLL170(T), WLL180T, WLL24 Ex and WLL80. Compatibility is ensured by the specific design of the fibre head and the M4 thread. This is a one-way system, supplied as a pair (transmitter and receiver).
Mounting and Installation
Mounting is performed via the M4 thread, which is attached to the corresponding sensors. The fibre heads must be clean and free from contamination to ensure optimal signal transmission. The fibre length of 2,000 mm requires appropriate placement of transmitter and receiver units, with the optical axes of both components aligned. Installation is typically carried out during the system integration of the respective plant.
Operational Advantages
The use of the LL3-TB01 enables reliable and flexible optical signal transmission over a distance of 2,000 mm. The use of stainless steel for the fibre head increases service life and resistance to environmental influences. Standardisation via the M4 thread ensures easy and secure mounting on compatible SICK sensors. The combination of plastic fibre and sheath provides sufficient mechanical stability while maintaining flexibility.