| Features |
| Product colour | Black, Grey |
| Cable length | 0.21 m |
| Connector 1 | 9 pin D-Sub |
| Connector 2 | 10-pin (2×5) |
| Connector 1 gender | Male |
| Connector 2 gender | Female |
| Compatible products | This accessory is compatible with:
1) Shuttle XPC all-in-one Barebone P20U / P22U / P51U / P52U series
2) Shuttle XPC slim Barebone DS10U / DS20U series
3) Shuttle XPC slim Barebone XH410G / XH510G / XH510G2 |
| Logistics data |
| Harmonized System (HS) code | 84733080 |
The Shuttle PCP11 is a COM-port adapter for Shuttle XPC barebone systems, which extends the number of available serial interfaces (RS232). The device serves as accessory for various Shuttle models and enables the integration of additional serial connections via a 9-pin D-Sub connector on the device surface. The adapter is available in black and grey and features a 9-pin flat ribbon cable with a length of approximately 21 cm, which is internally connected to a 10-pin (2×5) female connector with 2 mm pitch.
Applications
The PCP11 is used to increase the number of COM-ports in Shuttle XPC systems. For the all-in-one models P20U, P22U, P51U and P52U, which already feature two COM-ports as standard, the adapter can add up to two additional interfaces, resulting in a total of four RS232 interfaces. For the slim models DS10U and DS20U, which come standard with one COM-port and one VGA-port, the VGA-port can be removed and replaced with the PCP11 to achieve two COM-ports. For the models XH410G, XH510G and XH510G2, the adapter enables the installation of an additional COM-port on the rear of the device.
Functions and Equipment in Detail
The adapter features an external 9-pin D-Sub connector, which serves as a standard interface for serial devices. The internal connector is a 10-pin (2×5) female connector with a pitch of 2 mm, designed for connection to the motherboard of the Shuttle system. The flat ribbon cable has a length of approximately 21 cm and ensures a stable connection between the adapter and the internal connector. The use of flat ribbon cables is common in compact systems to save space and enable orderly cabling.
Technology Explained Simply
The PCP11 acts as a bridge between the internal motherboard and an external serial device. The RS232 interface enables communication with devices such as industrial automation systems, measuring instruments or other serial peripherals. The 9-pin D-Sub connector is a widely used standard in industry and provides a reliable mechanical and electrical connection. The 10-pin internal connector system with 2 mm pitch is specifically designed for Shuttle systems and ensures a precise fit.
Compatibility and Accessories
The adapter is compatible with Shuttle XPC all-in-one barebone models P20U, P22U, P51U and P52U, Shuttle XPC slim barebone models DS10U and DS20U, as well as models XH410G, XH510G and XH510G2. Compatibility is specific to these models and requires a corresponding connector configuration within the system. Installation is performed by securing the adapter to the device surface and connecting the flat ribbon cable to the internal connector.
Mounting and Installation
Mounting is done by securing the adapter to the designated location on the Shuttle system using two mounting screws (UNC 4-40). The flat ribbon cable is connected to the internal 10-pin connector. The installation manual, included in the delivery, provides detailed instructions for correct installation. Installation requires no additional tools other than a screwdriver, which is needed to tighten the screws.
Advantages in Operation
Using the PCP11 expands the connection options of Shuttle systems without requiring additional external adapters or USB-to-serial converters. This is particularly advantageous in environments where serial devices must be connected directly, such as in industrial automation or special measurement tasks. The direct integration into the system ensures a stable and reliable connection without additional connection lengths or signal losses.
The delivery includes the COM-port adapter, two mounting screws (UNC 4-40), and an installation manual. The manual contains the necessary steps for correct installation and connection of the adapter to the Shuttle system. The mounting screws are specifically designed for the used connectors to ensure a secure and durable installation.