Shuttle H-RS232, EAN: 4046047102358

Shuttle H-RS232 CTLR 1x COM

Computer-Components > Barebone > Accessories

Shuttle H-RS232 CTLR 1x COM

Lieske Part No. 479641
Mfg Part No H-RS232
EAN-Code 4046047102358
Manufacturer Shuttle
Here only 6,26 EUR
7,45 EUR incl. VAT

Further information for Shuttle H-RS232 CTLR 1x COM

Features
Product colourBlack, Grey
Cable length0.32 m
Connector 19-p Sub-D M
Connector 210-p RS-232 F
Connector 1 genderMale
Connector 2 genderFemale
Compatible productsSH510R4, SH570R6 (Plus),SH570R8, SW580R8, SH370R6 (Plus), SH370R6V2 (Plus), SH370R8, SA76R4, SH67H3, SH67H7, SH61R4, SZ68R5, SZ77R5, SX79R5, SH81R4, SH87R6, SZ87R6, SH97R6, SH110R4, SH170R6 (Plus), SZ170R8, SZ170R8V2, SZ270R8, SZ270R9, SH310R4, SH310R4V2
Logistics data
Harmonized System (HS) code84733080
The Shuttle H-RS232 is a serial COM port adapter for selected Shuttle XPC computers, enabling the addition of an RS232 interface. The accessory consists of an adapter cable with a 9-pin Sub-D plug on the external side and a 10-pin female RS232 connector (2x5, 2.54 mm pitch) on the internal side. The cable length is 32 cm and it is a flat ribbon cable. The adapter is available in black and grey color variants. Installation involves mounting a Sub-D plug on the back panel of the housing, which is connected via the cable to the serial interface on the motherboard. The interface must be activated in the BIOS under Super IO Configuration" > "Serial Port Configuration", setting the port to "enabled.

Applications
This adapter extends Shuttle XPC systems with a serial interface, required for communication with older or specialized devices such as industrial controls, measuring instruments, terminals, or other units with RS232 connections. Integration occurs directly within the housing, ensuring a stable and interference-free connection. Its use is particularly suitable in industrial, medical, or safety-critical environments where RS232 connections are still standard.

Functions and Equipment in Detail
The cable connects the internal 10-pin female connector (2x5, 2.54 mm pitch) to the external 9-pin Sub-D plug. The connection is made via a flat ribbon cable, ensuring clear assignment of signal lines. Installation requires removing a hole in the back panel suitable for the Sub-D plug and securing the plug with two hex screws. Correct polarity is ensured by markings on the cable and motherboard, with the marked wire positioned on the same side.

Technology Explained Simply
The RS232 interface is a standard for serial data transmission, transferring data bit by bit over a single cable pair. The 9-pin Sub-D plug format is a common standard for serial interfaces on computers and peripheral devices. The 10-pin female interface on the motherboard corresponds to the COM1 port, which must be activated in the BIOS. The 32 cm length provides sufficient clearance for internal cabling without excessive tension or bending.

Installation and Mounting
Mounting begins by removing the housing cover by loosening the three hinge screws. Next, a suitable hole in the back panel for the Sub-D plug is opened by pushing it inward with a screwdriver and breaking it off. The Sub-D plug is inserted from inside the hole and secured with two hex screws. The other end of the cable is connected to the COM1 connector on the motherboard, ensuring the marked wire aligns with the marking on the motherboard. After mounting, the housing is closed and the computer powered on. In the BIOS, the serial port is set to enabled" under "Advanced" > "Super IO Configuration" > "Serial Port Configuration and saved with F4.

Operational Advantages
The adapter enables the use of RS232-compatible devices without additional hardware or software adapters. Direct connection via the motherboard ensures stable and reliable data transmission. Installation is simple and requires no special tools beyond a screwdriver. Compatibility with a wide range of Shuttle models increases flexibility in system configuration.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/479641
qrcode für Shuttle H-RS232 CTLR 1x COM