Z-Wave™ Smart Switch, 1 Channel 16A Control a variety of devices and office equipment such as electric locks, gates, garage doors, irrigation systems, LED strips, lights and sockets from anywhere. The output contact is voltage-free (dry contact), allowing you to connect various power supply loads of up to 16 A to the device. Dry contact Extremely low internal consumption of the device: 0.3 W. Latest technology: Z-Wave 800 series Z-Wave frequency band: 868.4 MHz (CEPT countries) Automatic setup with SmartStart 2-factor authentication for the highest level of security Supports wireless Firmware Updates (OTA) Compatible with Z-Wave certified gateways and over 4,000 Z-Wave devices A gateway (smart hub) is required to configure the device.
*A gateway (smart hub) is not included.Shelly Qubino works with Z-Wave By using Z-Wave, smart home products can communicate seamlessly with each other thanks to a centralized smart hub, regardless of their brand or platform! Shelly Qubino devices work with the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes worldwide. Features Z-Wave Powered
Connect the Wave 1PM to your Z-Wave network and control it remotely. It is compatible with all certified Z-Wave gateways.
Associations
Establish direct communication between devices on your local Z-Wave network and set custom actions without the presence of a hub!
Dry contact
Connect various power supply loads (up to 16A) to the device.
Support a wide range of voltages
Use a wide range of output voltages, even for low voltages.
Smart Schedules
Create personalized schedules tailored to your daily routine or sync with sunrise and sunset to control your lighting (gateway required).
Smart scenes
Set custom scenes by combining the Wave 1PM with other Z-Wave devices (gateway required).APPLICATION EXAMPLE Automate lighting and make it follow your schedule Make any light switch smart and over control with Shelly Wave 1 Your phone or with a voice assistant. Use your hub's app to set automatic scenes based on an hour or sunset/sunrise. So you can set the porch light to turn on when you get home from work, or the hallway light to turn off when it's past your family's bedtime. And don't worry - light switches can still be manually operated to meet the needs of everyone in your home. Set up associations and let your home welcome you Configure Wave 1 and other devices on your Z-Wave network and create associations between them for direct communication without a gateway. Automate your door lock and lighting and set a rule: Whenever the front door is unlocked, the lobby/hallway lights turn on. Automate your irrigation system for effortless gardening With an automatic irrigation system, you can effortlessly control your garden's watering with a tap on your smartphone, even when you're on vacation. Simply set a schedule and the sprinklers will turn on and off automatically. Yes, it's that simple.Control your garage door remotely Have you closed the garage door after leaving your house? From now on you can easily check this using your smartphone. Wave 1 has operating voltages of 12 V DC and 24-48 V DC and is therefore perfect for controlling garage doors. Technical data Power supply 110-240 V AC / 24-48 V DC / 12 V DC ± 10% internal consumption of the device < 0.3 W Max. switching voltage AC 240 V Max. switching current AC 16 A Max. switching voltage DC 30 V Max. switching current DC 10 A Overload protection Yes Range Up to 40 m indoors (Depending on local conditions) Z-Wave™ repeater: Yes CPU Z-Wave™ S800 Z-Wave™ Radio Frequency: 868.4 MHz 865.2 MHz 869.0 MHz 921.4 MHz 908.4 MHz 916 MHz 919.8 MHz 922.5 MHz 919.7-921.7-923 .7 MHz 868.1 MHz 920.9 MHz Maximum transmitted radio frequency power in frequency band(s) < 25 mW Size (H x W x D) 37x42x16 ±0.5 mm Weight 26 g Installation Flush-mounted box Screw terminals max. Torque 0.4 Nm / 3.5 lbin Screw terminals max. Torque 0.5 to 1.5 mm² / 20 to 16 AWG Length of stripped conductor 5 to 6 mm / 0.20 to 0.24 in Housing material Plastic Color Blue Ambient temperature -20°C to 40°C Humidity 30% to 70% RH Max. Altitude 2000 m