General
Colour	Yellow/Green

The insulating sleeve Plio-Super 8.0x9.25 in the colour yellow/green is manufactured by Ses-Sterling and serves as a protective sleeve for electrical conductors and cables in the field of installation technology. It is specifically designed for use in electrical installations where mechanical and electrical insulation of the cables is required. The dimensions of 8.0 mm inner diameter and 9.25 mm outer diameter allow for a precise fit for cables with the corresponding cross-section. The yellow/green colouring corresponds to the marking for protective conductors according to DIN VDE 0100-510, making it particularly suitable for use in protective conductor installations.

Applications

The protective sleeve Plio-Super is used in electrical installations to protect cables from mechanical influences such as pressure, friction or abrasion. It is suitable for use indoors as well as in protected outdoor areas, provided the environmental conditions comply with the specified temperature and humidity limits. It is commonly used in building electrotechnics, for the installation of protective conductors, or for cable routing in cable ducts, control panels or machines. The yellow/green colour supports the clear identification of the protective conductor in accordance with standards and regulations.

Functions and Equipment in Detail

The insulating sleeve provides a mechanical protective sheath for electrical conductors and prevents unintended contact or damage to the insulation of the cables installed within. The material composition ensures high flexibility and durability, allowing it to be used even when repeatedly bent or in tight radii. The yellow/green colour is standardised for protective conductors and thus supports compliance with VDE regulations. The packaging unit is 25 metres, providing sufficient length for many installations.

Technology Explained Simply

The protective sleeve is made of an elastic plastic material that exhibits high tensile strength and resistance to mechanical stress. The specific dimension of 8.0 mm inner diameter and 9.25 mm outer diameter allows for a precise fit around cables with a corresponding diameter. The yellow/green colouring is not only visually identifiable but also conforms to the standard for protective conductors, enabling clear assignment during installation. According to the manufacturer, the temperature resistance ranges from -20 °C to +90 °C, allowing use in a wide range of environments, provided no additional chemical or mechanical stresses occur. The weight of 26 g per metre is low and does not negatively affect handling.

Compatibility and Accessories

The insulating sleeve Plio-Super 8.0x9.25 is compatible with cables having an outer diameter of approximately 8.0 mm. It can be used in combination with other protective sleeves, cable ties or cable ducts to ensure a structured and secure cable installation. Its use in control panels, machines or building electrotechnics is common. The yellow/green colour enables clear identification as a protective conductor, which is advantageous during installation and maintenance.

Installation and Mounting

Installation is carried out by simply sliding the protective sleeve over the cable to be protected. Due to the material's flexibility, it can also be routed around tight bends or corners. The length of 25 metres per packaging unit allows for efficient installation without frequent cutting. During installation, care should be taken to avoid excessive compression or stretching of the protective sleeve to maintain its functionality and service life. Use in enclosed systems such as cable ducts or control panels is recommended.

Operational Advantages

The use of the insulating sleeve Plio-Super 8.0x9.25 provides reliable mechanical protection for electrical conductors. The yellow/green colouring supports compliance with VDE standards and facilitates the identification of the protective conductor. The low weight of 26 g per metre and high flexibility ease handling and installation. The temperature resistance from -20 °C to +90 °C allows broad application in various environments. The packaging unit of 25 metres offers an economical and practical length for many installations.