General
Colour	Yellow

The PLIO SNAP+ PS-12 I" marker from Ses-Sterling is a cable identification system specifically developed for the clear identification of cables in electrical and IT applications. The markers are yellow in colour and feature a black print with the marking "I. They are suitable for cables with an outer diameter of 4.5 to 6.0 mm and a cable cross-section of 4.0 to 6.0 mm². The material of the markers is polyoxymethylene (POM), a robust, heat-resistant plastic material suitable for high mechanical stress. The yellow carrier rods, on which the markers are mounted, can also be purchased without markers, while the packaging unit offered here contains 12 pre-loaded carrier rods with a total of 300 markers.

Cable identification is a central component of proper installation and maintenance of electrical and data lines. The PLIO SNAP+ PS-12 I" markers enable quick and unambiguous assignment of cables, especially in complex systems, where visual differentiation by colour and labelling is necessary. The marking "I serves as a unique identifier, which can represent a specific function or cable category depending on internal systems or standardisation.

Functions and equipment in detail

The markers are designed as a SNAP+ system, meaning they can be directly slipped onto the cable and locked without tools or additional fastening elements. The locking mechanism is achieved through an elastic pull, which securely fixes the marker to the cable. The use of POM as material ensures high resistance to mechanical stress, chemical influences, and temperature fluctuations. The yellow colour of the carrier rods ensures good visibility, especially in dark or poorly lit installation environments.

Technology explained simply

The material POM (polyoxymethylene) is characterised by high strength, low friction, and good wear resistance. It is resistant to many chemicals and can be used in a temperature range of approximately -40 °C to +100 °C, making it suitable for use in industrial and technical installations. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm, making them suitable for medium to large cables in the field of electrical installation and data communication. The marking "I" is clearly legible and enables quick identification.

Compatibility and accessories

The PLIO SNAP+ PS-30,5 cm ( 12 inch )I" markers are specifically designed for cables with an outer diameter of 4.5 to 6.0 mm. They are part of the PLIO SNAP+ system from Ses-Sterling and can be combined with other markers from this series to ensure a uniform identification system. The carrier rods are available in yellow and can be purchased without markers, allowing for individual labelling or adaptation. The packaging unit offered here contains 12 pre-loaded carrier rods with a total of 300 markers.

Installation and mounting

Mounting is tool-free: the marker is simply slipped over the cable and locked in place by an elastic pull. The locking is secure and durable, without damaging the cable. The markers can also be removed and repositioned later, which is advantageous for modifications or maintenance work. The yellow colour and clear marking "I" ensure quick recognition even in complex installations.

Advantages in operation

The use of POM as material ensures a long service life and high reliability of the markers. The SNAP+ technology enables quick, tool-free installation, reducing installation time. The unique marking "I" combined with the yellow colour facilitates cable identification and maintenance, especially in large installations. The markers are suitable for use in industrial and technical environments where clear and permanent identification is required.

The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers. The packaging weight is 0.075 kg. The markers are yellow in colour with black print "I" and are made of POM. The carrier rods are also yellow and can be purchased without markers, while the unit offered here is pre-loaded. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The packaging unit contains 12 carrier rods with a total of 300 markers.

The markers are suitable for use in technical and industrial installations where clear and permanent cable identification is required. The yellow colour and marking "I" ensure quick and unambiguous identification. The SNAP+ technology enables tool-free installation, and the POM material offers high durability and longevity.

The packaging unit contains 12 pre-loaded carrier rods with a total of 300 markers. The packaging weight is 0.075 kg. The markers are yellow in colour with black print "I" and are made of POM. The carrier rods are also yellow and can be purchased without markers, while the unit offered here is pre-loaded. The markers are designed for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². The packaging unit contains 12 carrier rods with a total of 300 markers.

The markers are suitable for use in technical and industrial installations where clear and permanent cable identification is required. The yellow colour and marking "I" ensure quick and unambiguous identification. The SNAP+ technology enables tool-free installation, and the POM material offers high durability and longevity.