General
Colour	Yellow

The PLIO SNAP+ PS-06 H" marker from Ses-Sterling is a cable identification system, specifically designed for the clear identification of cables in the field of electrical and IT technology. It is used for visual marking of cables with an outer diameter between 2.6 and 3.5 mm and a cable cross-section of 1 to 1.5 mm². The markers are yellow with black printed identification "H and are made of POM plastic, a material known for its high strength, heat resistance, and chemical resistance. The carrier rods, on which the markers are mounted, are red and can also be purchased empty, enabling flexible use.

Cable identification is a central component in the planning and maintenance of electrical and data installations, helping to minimize error sources and simplify cable assignment. The PLIO SNAP+ PS-15,2 cm ( 6 inch )H" provides a robust and durable solution, distinguished by clear, easily readable labeling. The yellow color of the markers ensures high visibility, especially in complex installations where quick cable identification is required.

Functions and equipment in detail

The markers are designed as self-adhesive, shrinkable, or snap-in systems. The PLIO SNAP+ system enables a mechanical locking mechanism that ensures secure fastening without adhesive or additional tools. The identification "H" is clearly and distinctly printed, allowing for unambiguous assignment to specific cables or systems. The packaging unit contains 10 pre-loaded carrier rods, totaling 300 markers. The carrier rods are red and serve as practical storage and transport units.

Technology explained simply

The use of POM (polyoxymethylene) as the material for the markers ensures high mechanical stability and resistance to wear, temperature fluctuations, and chemical influences. This makes the markers particularly suitable for use in industrial environments or in installations subjected to high stress. The snap-in technology enables quick and easy installation without requiring additional tools or adhesives. The markers adapt to the cable diameter through their shape and hold securely without damaging the cable.

Compatibility and accessories

The markers are designed for cables with an outer diameter of 2.6 to 3.5 mm and a cross-section of 1 to 1.5 mm². They are therefore suitable for a wide range of standard cables in electrical and data cabling. The carrier rods are red and can be purchased empty, allowing for individual loading. The packaging unit contains 10 pre-loaded carrier rods with a total of 300 markers.

Installation and mounting

Mounting is done by simply inserting the marker onto the cable, where the snap-in locking mechanism ensures secure fastening. No additional tools or adhesives are required. The markers can be easily installed and removed, enabling flexible use and maintenance. The markers are applied directly to the cable and adapt to the specified diameter.

Operation

The markers are designed for long-term use and provide clear, durable identification. The yellow color with black print ensures high readability, even under low lighting conditions. The use of POM ensures long service life and resistance to environmental influences. The snap-in technology enables quick and secure installation, reducing work time during installations and maintenance.

Advantages in operation

The clear identification with the designation "H" enables quick and secure cable assignment. The high visibility due to the yellow color and clear labeling reduces error sources and accelerates maintenance and repair work. The robust material construction from POM ensures long service life and resistance to mechanical and chemical stresses. The simple installation without tools or adhesives increases efficiency during installation.

The packaging unit contains 10 pre-loaded carrier rods with a total of 300 markers. The carrier rods are red and serve as practical storage and transport units. The packaging weight is 0.038 kg.

Cable identification, markers, POM, snap-in technology, yellow, identification "H" are the key features of this product, essential for applications in electrical and IT technology.