General
Colour	Yellow

The PLIO SNAP+ PS-03 A.C. marker from Ses-Sterling is a cable identification system for use in electrical and IT installations. It serves for the unambiguous identification of cables and lines, particularly in complex cabling systems. The markers are available in yellow with black print and are made of POM plastic, a material known for its high strength and chemical resistance. The carrier rods, which hold the markers, are green and can also be purchased without markers. The packaging unit contains 10 pre-loaded carrier rods with a total of 300 markers, enabling efficient and fast identification. The packaging weighs 28 g.

Cable identification is a central component of proper cabling to avoid errors during maintenance, repair, or expansion. The PLIO SNAP+ PS-03 A.C. is specifically designed for cables with an outer diameter of 1.9 to 2.6 mm and a cable cross-section of 0.75 mm². These dimensions cover a wide range of standard cables in the field of electrical and data installation. The markers are designed to securely fit on the cable and not accidentally fall off, ensuring durable identification.

POM material offers high mechanical stability and is resistant to moisture, oil, and many chemical substances. This makes the markers suitable for applications requiring high durability and longevity. The yellow color with black print ensures good readability, even in low light or complex installations. The combination of color and contrast facilitates quick identification of marked lines.

The markers are designed for simple and fast installation. They are applied to the cable using a special carrier rod, with the SNAP+ technology ensuring secure fastening. The carrier rods are green and allow visual differentiation from other marking systems. The packaging unit contains 10 pre-loaded carrier rods, increasing work efficiency as multiple markers can be applied simultaneously.

Compatibility is a key factor when selecting marking systems. The PLIO SNAP+ PS-03 A.C. is specifically designed for cables with an outer diameter of 1.9 to 2.6 mm and a cross-section of 0.75 mm². These specifications cover typical applications in electrical and data cabling. The markers are not suitable for larger or smaller cables, as secure fastening cannot be guaranteed. The use of POM as material ensures high resistance to environmental influences, extending the lifespan of the markers.

Installation is done by simply sliding the markers onto the cable using the carrier rod. The SNAP+ technology ensures that the markers sit securely and do not accidentally fall off. This is particularly important in environments with vibrations or mechanical stress. The green carrier rods allow quick identification of the marking system, which is helpful when working in complex installations. The packaging unit with 300 markers is suitable for larger projects and reduces the need for frequent reordering.

Operational advantages include high readability, easy installation, and the longevity of the markers. The combination of yellow and black print ensures clear visibility, even in poorly lit areas. The use of POM ensures high mechanical strength and chemical resistance, making the markers suitable for a wide range of applications. The SNAP+ technology enables secure fastening that holds even under load. The packaging unit with 300 markers is suitable for larger projects and reduces the need for frequent reordering.

The markers are not intended for use in explosive environments, as no special approvals or protection classes are mentioned. The use is exclusively for cable identification, without additional functions such as data transmission or electrical conductivity. The markers are not waterproof or dustproof, as no IP rating is specified. Use is intended for indoor or protected outdoor areas where direct moisture or dust exposure does not occur.

The packaging unit contains 10 pre-loaded carrier rods with a total of 300 markers. The carrier rods are green and serve to secure the markers onto the cable. The markers are not suitable for cables outside the specified diameter range of 1.9 to 2.6 mm.

Application areas include the identification of electrical and data cables in buildings, industrial plants, server rooms, and other technical installations. The markers are particularly useful in environments where clear and durable identification of lines is required. The use of POM and SNAP+ technology ensures high reliability and longevity. The yellow color with black print ensures good readability, even in low light.

The markers are not intended for use in explosive environments, as no special approvals or protection classes are mentioned. The use is exclusively for cable identification, without additional functions such as data transmission or electrical conductivity. The markers are not waterproof or dustproof, as no IP rating is specified. Use is intended for indoor or protected outdoor areas where direct moisture or dust exposure does not occur.

Installation is done by simply sliding the markers onto the cable using the carrier rod. The SNAP+ technology ensures that the markers sit securely and do not accidentally fall off. This is particularly important in environments with vibrations or mechanical stress. The green carrier rods allow quick identification of the marking system, which is helpful when working in complex installations. The packaging unit with 300 markers is suitable for larger projects and reduces the need for frequent reordering.

Operational advantages include high readability, easy installation, and the longevity of the markers. The combination of yellow and black print ensures clear visibility, even in poorly lit areas. The use of POM ensures high mechanical strength and chemical resistance, making the markers suitable for a wide range of applications. The SNAP+ technology enables secure fastening that holds even under load. The packaging unit with 300 markers is suitable for larger projects and reduces the need for frequent reordering.

The markers are not intended for use in explosive environments, as no special approvals or protection classes are mentioned. The use is exclusively for cable identification, without additional functions such as data transmission or electrical conductivity. The markers are not waterproof or dustproof, as no IP rating is specified. Use is intended for indoor or protected outdoor areas where direct moisture or dust exposure does not occur.

The packaging unit contains 10 pre-loaded carrier rods with a total of 300 markers. The carrier rods are green and serve to secure the markers onto the cable. The markers are not suitable for cables outside the specified diameter range of 1.9 to 2.6 mm.

Cable identification is a central component of proper cabling to avoid errors during maintenance, repair, or expansion. The PLIO SNAP+ PS-03 A.C. is specifically designed for cables with an outer diameter of 1.9 to 2.6 mm and a cable cross-section of 0.75 mm². These dimensions cover a wide range of standard cables in the field of electrical and data installation. The markers are designed to securely fit on the cable and not accidentally fall off, ensuring durable identification.

POM material offers high mechanical stability and is resistant to moisture, oil, and many chemical substances. This makes the markers suitable for applications requiring high durability and longevity. The yellow color with black print ensures good readability, even in low light or complex installations. The combination of color and contrast facilitates quick identification of marked lines.

The markers are designed for simple and fast installation. They are applied to the cable using a special carrier rod, with the SNAP+ technology ensuring secure fastening. The carrier rods are green and allow visual differentiation from other marking systems. The packaging unit contains 10 pre-loaded carrier rods, increasing work efficiency as multiple markers can be applied simultaneously.

Compatibility is a key factor when selecting marking systems. The PLIO SNAP+ PS-03 A.C. is specifically designed for cables with an outer diameter of 1.9 to 2.6 mm and a cross-section of 0.75 mm². These specifications cover typical applications in electrical and data cabling. The markers are not suitable for larger or smaller cables, as secure fastening cannot be guaranteed. The use of POM as material ensures high resistance to environmental influences, extending the lifespan of the markers.

Installation is done by simply sliding the markers onto the cable using the carrier rod. The SNAP+ technology ensures that the markers sit securely and do not accidentally fall off. This is particularly important in environments with vibrations or mechanical stress. The green carrier rods allow quick identification of the marking system, which is helpful when working in complex installations. The packaging unit with 300 markers is suitable for larger projects and reduces the need for frequent reordering.

Operational advantages include high readability, easy installation, and the longevity of the markers. The combination of yellow and black print ensures clear visibility, even in poorly lit areas. The use of POM ensures high mechanical strength and chemical resistance, making the markers suitable for a wide range of applications. The SNAP+ technology enables secure fastening that holds even under load. The packaging unit with 300 markers is suitable for larger projects and reduces the need for frequent reordering.

The markers are not intended for use in explosive environments, as no special approvals or protection classes are mentioned. The use is exclusively for cable identification, without additional functions such as data transmission or electrical conductivity. The markers are not waterproof or dustproof, as no IP rating is specified. Use is intended for indoor or protected outdoor areas where direct moisture or dust exposure does not occur.

The packaging unit contains 10 pre-loaded carrier rods with a total of 300 markers. The carrier rods are green and serve to secure the markers onto the cable. The markers are not suitable for cables outside the specified diameter range of 1.9 to 2.6 mm.