General
Colour	Yellow

The PLIO SNAP+ PS-7,6 cm ( 3 inch )." marker from Ses-Sterling is a cable labelling system specifically designed for labelling cables with an outer diameter of 1.9 to 2.6 mm and a cable cross-section of 0.75 mm². The markers are made of POM (polyoxymethylene), a robust and wear-resistant plastic suitable for applications in electrical and IT technology. The markers are yellow in colour with black printing, ensuring clear readability even under low lighting conditions. The carrier rods, on which the markers are mounted, are green and can be purchased without markers. The packaging unit contains 10 pre-loaded carrier rods, holding a total of 300 markers. The packaging weighs 28 g.

Cable labelling is an essential component of structured cabling, particularly in complex installations in electrical engineering, IT infrastructure, or industrial automation. The PLIO SNAP+ PS-7,6 cm ( 3 inch )." enables quick and secure cable labelling, reducing errors during installation, maintenance, or repair. The markers are designed for use in environments where clear and durable labelling is required, for example in server rooms, enclosures, or machine cabling.

Functions and equipment in detail

The markers are self-adhesive labels that attach to the carrier rods via a SNAP+ system. This system allows for easy handling and quick installation without tools. Labelling is done with a single dot (".") – a standard marking used in many technical applications to indicate a specific position, connection, or cable group. The use of POM as material ensures high mechanical strength and resistance to chemical influences, extending the service life of the markers.

Technology explained simply

The markers are designed for cables with an outer diameter of 1.9 to 2.6 mm, making them suitable for a wide range of cable types, particularly those with a cross-section of 0.75 mm². These dimensions correspond to commonly used cables in electrical installations, such as H05VV-F or H07V-K. The POM material offers good heat resistance and is resistant to many solvents and oils, making the markers suitable for use in industrial environments. The yellow colour of the markers with black printing provides high contrast, improving readability.

Compatibility and accessories

The markers are specifically designed for use with the green carrier rods of the PLIO SNAP+ system. These carrier rods can be purchased without markers, allowing flexible combination with various marker types. The packaging unit includes 10 pre-loaded carrier rods, each holding 30 markers. The markers are not intended for use with other labelling systems, as they are specifically matched to the SNAP+ system.

Mounting and installation

Installation is done by simply attaching the markers to the carrier rods using the SNAP+ system. The carrier rods are then clamped onto the cables, with the markers automatically fixing at the desired position. The installation requires no tools and can be performed quickly and without additional aids. The markers adhere to the cable via self-adhesive backing, ensuring a secure attachment.

Advantages in operation

Using the PLIO SNAP+ PS-7,6 cm ( 3 inch )." provides reliable and durable labelling that withstands industrial conditions. The clear dot marking enables quick identification of cables, especially in systems requiring standardised labelling. The choice of POM material ensures a long service life and resistance to mechanical stress and environmental influences. The yellow colour with black printing ensures good visibility, facilitating maintenance and inspection.