General
Colour	Yellow

The PLIO SNAP+ PS-01 G" marker from Ses-Sterling is a cable identification system specifically designed for marking cables with an outer diameter of 1.0 to 1.4 mm and a cable cross-section of 0.32 mm². The markers are made of POM (polyoxymethylene), a robust and wear-resistant plastic suitable for electrical applications. The carrier rods, finished in brown, are available unpopulated, while the yellow markers with black print "G are pre-mounted on the rods. A packaging unit contains 10 such populated carrier rods, totaling 300 markers. The packaging is provided as a bag and weighs 18 g.

Cable identification is a central component in electrical and IT installations, enabling clear identification of cables and preventing errors during maintenance or renovation. The PLIO SNAP+ PS-2,5 cm ( 1 inch )G" serves as a visual marker directly attached to the cable. The yellow color with black print ensures good readability and contrast, which is particularly advantageous in complex installations. The markers are intended for use in electrical systems where clear assignment of conductors is required.

Functions and equipment in detail
The markers are designed to be easily and securely slipped onto cables with the specified diameter. The POM material ensures high mechanical strength and resistance to environmental influences, enhancing the durability of the marking. The carrier rods enable efficient storage and handling of the markers, with pre-populated rods allowing immediate use without additional preparation. The packaging unit containing 300 markers is suitable for larger projects or series installations.

Technology explained simply
POM is a thermoplastic polymer known for its high strength, heat resistance, and abrasion resistance. These properties make it particularly suitable for use in electrical installations, where markers may be subjected to mechanical stress and possible temperature fluctuations. The yellow color with black print "G" serves visual differentiation and is commonly used in practice to mark specific cable types or functions.

Compatibility and accessories
The PS-01 marker is specifically designed for cables with an outer diameter of 1.0 to 1.4 mm. It is therefore suitable for thin conductors, such as those found in control wiring or data cables. The use of unpopulated carrier rods allows for individual labeling or customization if required. The packaging unit includes pre-populated rods, so no additional components are needed.

Installation and mounting
Mounting is done by simply slipping the marker onto the cable. The marker's shape ensures secure attachment without additional tools. The carrier rods facilitate sorting and selection of required markers, increasing installation efficiency. The markers are intended for indoor installations, and the material choice indicates a certain resistance to environmental influences.

Operational advantages
The clear marking with the letter "G" enables quick cable identification, simplifying maintenance and fault diagnosis. The robust material construction ensures the markers retain their function even with frequent handling or in technically demanding environments. The packaging unit with 300 markers offers an economical solution for larger installations, reducing the need for frequent reordering. The use of POM as material ensures long service life and low wear.

The markers are available in yellow with black print "G". The carrier rods are brown and populated. The packaging unit contains 10 carrier rods with a total of 300 markers. The packaging weighs 18 g and is provided as a bag. The markers are designed for cables with an outer diameter of 1.0 to 1.4 mm and a cross-section of 0.32 mm². The material is POM. The markers are suitable for use in electrical systems where clear and durable identification is required. The packaging unit is designed for larger projects and offers efficient handling of the markers.