General
Colour	Yellow

The Ses-Sterling Pliosnap+ PS-01 4 yellow is a cable marker from the PLIO SNAP+ product series, specifically designed for marking cables with an outer diameter of 1.0 to 1.4 mm and a cable cross-section of 0.32 mm². The markers are yellow in colour and feature a black print with the marking "10,2 cm ( 4 inch ). The material of the markers is polyoxymethylene (POM), a thermoplastic material known for its high strength, heat resistance, and chemical resistance. The carrier strips, on which the markers are mounted, are brown and can be purchased without markers, while the packaging unit offered here includes 10 pre-loaded carrier strips containing a total of 300 markers.

Cable markers serve for the clear identification of cables in electrical and IT installations, helping to avoid errors during installation, maintenance, or repair. The marking is done via the printed value "10,2 cm ( 4 inch ), which may refer to a cable number, a position in a circuit diagram, or another project-specific assignment. The colour yellow supports visual differentiation within a cable bundle or installation, with the combination of yellow carrier and black print ensuring good readability.

Applications include electrical installations, building automation, IT infrastructure, and industrial plants where precise and durable cable marking is required. The markers are designed for cables with an outer diameter of 1.0 to 1.4 mm, making them suitable for fine wires in control systems, sensors, or communication networks. The use of POM as material ensures high mechanical stability and good resistance to ageing, enabling the markers to maintain their function over long periods even under industrial conditions.

Functions and equipment in detail include pre-mounted markers on carrier strips, enabling efficient handling and quick attachment to cables. The carrier strips are brown and pre-loaded, with markers already arranged in the desired position. The packaging unit contains 10 such carrier strips, including a total of 300 markers. The markers are not self-adhesive but are attached to the cable via a special clip or snap mechanism, allowing secure fastening without additional tools.

Technology explained simply shows that the markers are made from a robust thermoplastic material that withstands mechanical stress as well as environmental influences such as moisture or temperature fluctuations. The yellow colour with black print ensures clear visibility, even in poorly lit areas. The pre-loaded carrier strips reduce installation effort and enable quick and error-free cable marking during installations.

Compatibility and accessories refer to the use of markers with cables in the specified diameter range of 1.0 to 1.4 mm. The carrier strips are designed for mounting the markers and can be purchased without markers, allowing for custom loading.

Installation and mounting is done by attaching the markers to the cable using the integrated snap mechanism. The markers are not self-adhesive but are fixed by a mechanical closure, ensuring secure attachment. The pre-loaded carrier strips simplify handling, as markers are already arranged in the correct position. No additional tools are required for mounting.

Operational advantages include high readability of the marking, robust material construction from POM, and efficient handling due to pre-loaded carrier strips. The markers are designed for use in electrical and IT installations where durable and unambiguous cable marking is required. The yellow colour supports visual differentiation within complex installations, facilitating maintenance and fault diagnosis.

The packaging unit contains 10 pre-loaded carrier strips with a total of 300 markers. The carrier strips are brown and pre-loaded, with markers already arranged in the desired position. The markers are not self-adhesive but are attached to the cable via a special clip or snap mechanism, enabling secure fastening without additional tools. The packaging unit weighs 18 g.

The markers are designed for cables with an outer diameter of 1.0 to 1.4 mm and a cross-section of 0.32 mm². The material is POM, known for its high strength, heat resistance, and chemical resistance. The markers are yellow in colour, with a black print showing the marking "10,2 cm ( 4 inch ). The carrier strips are brown and can be purchased without markers, while the packaging unit offered here is pre-loaded.

The markers are designed for use in electrical and IT installations where precise and durable cable marking is required. The pre-loaded carrier strips reduce installation effort and enable quick and error-free cable marking during installations. The POM material ensures high mechanical stability and good resistance to ageing, enabling the markers to maintain their function over long periods even under industrial conditions.

The markers are not self-adhesive but are attached to the cable via a mechanical closure. No additional tools are required for mounting. The packaging unit contains 10 pre-loaded carrier strips with a total of 300 markers. The carrier strips are brown and pre-loaded, with markers already arranged in the desired position. The packaging unit weighs 18 g.

The markers are designed for cables with an outer diameter of 1.0 to 1.4 mm and a cross-section of 0.32 mm². The material is POM, known for its high strength, heat resistance, and chemical resistance. The markers are yellow in colour, with a black print showing the marking "10,2 cm ( 4 inch ). The carrier strips are brown and can be purchased without markers, while the packaging unit offered here is pre-loaded.

The markers are designed for use in electrical and IT installations where precise and durable cable marking is required. The pre-loaded carrier strips reduce installation effort and enable quick and error-free cable marking during installations. The POM material ensures high mechanical stability and good resistance to ageing, enabling the markers to maintain their function over long periods even under industrial conditions.

The markers are not self-adhesive but are attached to the cable via a mechanical closure. No additional tools are required for mounting. The packaging unit contains 10 pre-loaded carrier strips with a total of 300 markers. The carrier strips are brown and pre-loaded, with markers already arranged in the desired position. The packaging unit weighs 18 g.