General
Colour	Yellow

The Ses-Sterling Pliosnap+ PS-01 2 yellow is a cable marker from the PLIO SNAP+ product series, specifically designed for marking cables with an outer diameter of 1.0 to 1.4 mm and a cable cross-section of 0.32 mm². The markers are yellow in colour with a black print of the digit “2” and are made of polyoxymethylene (POM), a robust, heat-resistant plastic suitable for use in electrical and electronic installations. The carrier rods, on which the markers are mounted, are brown and can be purchased without markers; however, the packaging unit offered here includes 10 pre-loaded carrier rods, containing a total of 300 markers.

Cable markers serve to uniquely identify cables and wiring in electrical installations, preventing errors during assembly, maintenance, or repair. The colour yellow and the black print ensure good readability, especially in high-stress environments or low-light conditions. The markers are designed for use in installations where clear and durable marking is required, such as in buildings, industrial facilities, or IT infrastructure cabling.

Functions and equipment in detail

The markers are designed for cables with an outer diameter of 1.0 to 1.4 mm, making them suitable for thin wires in electrical installations or data cabling. The cable cross-section of 0.32 mm² corresponds to a typical size for fine signal or control lines. The material POM offers high mechanical strength, wear resistance, and chemical resistance, ensuring long-term durability of the markers under various operating conditions. The carrier rods are made of a brown material and are used for storage and transport of the markers; they are not part of the marking itself but support handling.

Technology explained simply

POM (polyoxymethylene) is a thermoplastic polymer known for its excellent mechanical properties, such as high stiffness, abrasion resistance, and wear resistance. It is also resistant to many chemicals and can be used at temperatures up to approximately 140 °C, making it suitable for use in electrical installations. The markers are designed to be easily and securely wrapped around the cable, with their shape ensuring a firm fit without damaging the cable.

Compatibility and accessories

The markers are specifically designed for cables with an outer diameter of 1.0 to 1.4 mm and a cross-section of 0.32 mm². They are part of the PLIO SNAP+ system by Ses-Sterling and can be combined with other products in this product line, particularly with the brown carrier rods, which are also available in the system. The packaging unit contains 300 markers mounted on 10 carrier rods, enabling efficient storage and handling.

Installation and mounting

Mounting is done by simply wrapping the marker around the cable. The design of the marker ensures it adapts elastically and remains securely in place. No additional tools or adhesives are required. The markers are intended for use in electrical installations, and marking should comply with applicable standards and regulations to ensure unique identification.

Advantages in operation

Using Pliosnap+ PS-01 markers enables quick and secure cable identification, reducing errors during installation or maintenance. The choice of POM material ensures long service life and resistance to environmental influences. The clear yellow colour with black print ensures high readability, even in poorly lit areas. The delivery in the form of 10 pre-loaded carrier rods with a total of 300 markers provides a practical and economical solution for larger projects.

The packaging unit weighs 18 g and contains 300 markers mounted on 10 carrier rods. The carrier rods are brown and serve for storage and handling of the markers. This is a packaging unit designed for professional use in electrical and IT installations.

The markers are intended for use in installations with cables in the diameter range of 1.0 to 1.4 mm and a cross-section of 0.32 mm². The material and colour selection ensure clear, durable, and easily readable marking.