The PLIO SNAP+ PS-30,5 cm ( 12 inch )C" marker from Ses-Sterling is a cable identification system for use in electrical and IT installations. It serves for the unambiguous identification of cables and lines, with the identification marked by the letter C. The markers are white in colour, with black print, and made of the plastic POM (Polyoxymethylene), a material known for its high strength, heat resistance, and chemical resistance. The packaging unit contains 12 pre-loaded carrier rods, which together include 300 markers. The carrier rods themselves are yellow and can also be purchased unloaded, enabling flexible use.

Applications
This marker is specifically designed for cables with an outer diameter of 4.5 to 6.0 mm and a cable cross-section of 4.0 to 6.0 mm². These dimensions cover a typical range for power and data lines, particularly in building installations, industrial electrical engineering, and IT infrastructures. The identification with the letter C enables clear assignment within cable bundles or during maintenance and servicing of systems.

Functions and Equipment in Detail
The markers are designed as Snap-on type, meaning they can be applied to the cable without tools and without cutting or drilling. The locking mechanism is achieved through an elastic closure system, ensuring secure fastening. The White colour with black print ensures good readability, even under low light conditions. The choice of POM material ensures high mechanical load capacity and durability, even under industrial conditions.

Technology Explained Simply
The construction of the marker allows for easy and quick installation. The carrier rods, which are yellow in colour, serve as transport and storage units. The markers themselves are pre-arranged on the rods and can be individually pulled off. The material composition of POM offers high resistance to wear, moisture, and temperature fluctuations, ensuring suitability for various environments. The identification with the letter C is clear and permanent, without fading.

Compatibility and Accessories
The markers are suitable for cables with an outer diameter of 4.5 to 6.0 mm and a cross-section of 4.0 to 6.0 mm². They are part of the PLIO SNAP+ system and can be combined with other markers from the same series to ensure a uniform identification system. The yellow carrier rods are optionally available unloaded, allowing for individual loading.

Installation and Mounting
Installation is done by simply sliding the marker over the cable and then clicking it into the locking mechanism. No tools are required, and the fastening is quick and secure. The markers can also be removed again without damaging the cable. The markers are used directly on the cable, with the correct fit ensured by the specified dimensions.

Advantages in Operation
The uniform identification with the letter C supports clarity in complex installations. The material quality of POM ensures long service life and resistance to environmental influences. The simple tool-free installation reduces installation time and minimizes errors. The packaging with 300 markers per unit offers an economical solution for larger projects.