The PLIO SNAP+ PS-09 A" marker from Ses-Sterling is a cable identification system for use in electrical and IT technology. It is designed for the clear identification of cables and lines to avoid error sources during installation, maintenance, or repair. The markers are white in colour and feature the black print "A, making them highly legible and easily identifiable. The product is specifically designed for cables with an outer diameter of 3.2 to 4.5 mm and a cable cross-section of 2.5 mm². The packaging unit contains 12 loaded carrier rods, which together include 300 markers.

Cable identification is an essential component of professional installation work, ensuring the correct assignment of lines to devices, control panels, or networks. The PLIO SNAP+ PS-22,9 cm ( 9 inch )A" enables quick and secure labelling without requiring additional tools or adhesives. The markers are made of POM (polyoxymethylene), a robust plastic known for its high strength, heat resistance, and chemical resistance. This material quality ensures long service life and reliability under various operating conditions.

Carrier rods in blue colour serve as storage and transport means for the markers. They can be purchased unloaded, enabling flexible use. The carrier rods are designed so that markers can be easily removed and slipped onto the cable. The packaging unit contains 12 such carrier rods, each loaded with markers. The total packaging weighs 56 g and is supplied in a bag.

The cable identification systems from Ses-Sterling are designed for use in industrial, commercial, and technical environments. The markers are suitable for cables with an outer diameter of 3.2 to 4.5 mm, making them applicable for a wide range of standard cables in electrical and data cabling. The cable cross-section specification of 2.5 mm² refers to the maximum cross-sections for which the markers are recommended, ensuring a secure fit without damaging the cable jacket.

The material quality of POM provides high mechanical stability and resistance to mechanical stress, such as during installation or operation. POM is also resistant to many chemicals and exhibits good ageing resistance, enabling long-term use of the markers in various environments. The white colour with black print ensures clear readability, even under low light conditions or in complex cabling situations.

The packaging unit contains a total of 300 markers distributed across 12 carrier rods. This quantity is suitable for larger projects or for use in workshops where continuous availability of labels is required. The carrier rods are supplied in a bag, facilitating transport and storage. The total weight of 56 g refers to the entire packaging unit.

The markers are designed for use in electrical and IT technology and support compliance with standards and regulations requiring clear identification of lines. The clear labelling with "A" enables quick assignment, especially in systems labelled according to a specific scheme. The use of POM as material ensures high reliability and durability of the markers under industrial conditions.

Cable identification systems such as the PLIO SNAP+ PS-22,9 cm ( 9 inch )A" are indispensable in modern electrical and IT installations. They reduce error sources, speed up maintenance work, and increase safety when working with electrical and data lines. The combination of robust material, clear labelling, and practical packaging makes this product a reliable solution for professional users.

The markers are designed for cables with an outer diameter of 3.2 to 4.5 mm and a cross-section of 2.5 mm². The packaging unit contains 300 markers on 12 carrier rods. The carrier rods are blue and can be purchased unloaded. The markers are made of POM and are available in white with black print "A". The packaging is a bag with a total weight of 56 g.

The cable identification is performed by simply sliding the markers onto the cable. The shape and size of the markers ensure a secure fit without damaging the cable jacket. The material quality of POM provides high mechanical strength and resistance to chemical influences. The clear labelling with "A" enables quick and unambiguous identification of lines.

The carrier rods in blue colour serve as a practical storage solution. They are designed so that markers can be easily removed and placed onto the cable. The packaging unit contains 12 such carrier rods, which together include 300 markers. The total packaging weighs 56 g and is supplied in a bag.

The material quality of POM is known for its high strength, heat resistance, and chemical resistance. These properties make the markers suitable for use in industrial and commercial environments. The white colour with black print ensures clear readability, even under low light conditions.

The packaging unit contains 300 markers distributed across 12 carrier rods. This quantity is suitable for larger projects or for use in workshops. The carrier rods are supplied in a bag, facilitating transport and storage. The total weight of 56 g refers to the entire packaging unit.

The markers are designed for use in electrical and IT technology and support compliance with standards and regulations requiring clear identification of lines. The clear labelling with "A" enables quick assignment, especially in systems labelled according to a specific scheme. The use of POM as material ensures high reliability and durability of the markers under industrial conditions.

The cable identification systems from Ses-Sterling are designed for use in industrial, commercial, and technical environments. The markers are suitable for cables with an outer diameter of 3.2 to 4.5 mm, making them applicable for a wide range of standard cables in electrical and data cabling. The cable cross-section specification of 2.5 mm² refers to the maximum cross-sections for which the markers are recommended, ensuring a secure fit without damaging the cable jacket.

The material quality of POM provides high mechanical stability and resistance to mechanical stress, such as during installation or operation. POM is also resistant to many chemicals and exhibits good ageing resistance, enabling long-term use of the markers in various environments. The white colour with black print ensures clear readability, even under low light conditions or in complex cabling situations.

The packaging unit contains a total of 300 markers distributed across 12 carrier rods. This quantity is suitable for larger projects or for use in workshops where continuous availability of labels is required. The carrier rods are supplied in a bag, facilitating transport and storage. The total weight of 56 g refers to the entire packaging unit.

The markers are designed for use in electrical and IT technology and support compliance with standards and regulations requiring clear identification of lines. The clear labelling with "A" enables quick assignment, especially in systems labelled according to a specific scheme. The use of POM as material ensures high reliability and durability of the markers under industrial conditions.

The cable identification is performed by simply sliding the markers onto the cable. The shape and size of the markers ensure a secure fit without damaging the cable jacket. The material quality of POM provides high mechanical strength and resistance to chemical influences. The clear labelling with "A" enables quick and unambiguous identification of lines.

The carrier rods in blue colour serve as a practical storage solution. They are designed so that markers can be easily removed and placed onto the cable. The packaging unit contains 12 such carrier rods, which together include 300 markers. The total packaging weighs 56 g and is supplied in a bag.

The material quality of POM is known for its high strength, heat resistance, and chemical resistance. These properties make the markers suitable for use in industrial and commercial environments. The white colour with black print ensures clear readability, even under low light conditions.

The packaging unit contains 300 markers distributed across 12 carrier rods. This quantity is suitable for larger projects or for use in workshops. The carrier rods are supplied in a bag, facilitating transport and storage. The total weight of 56 g refers to the entire packaging unit.

The markers are designed for use in electrical and IT technology and support compliance with standards and regulations requiring clear identification of lines. The clear labelling with "A" enables quick assignment, especially in systems labelled according to a specific scheme. The use of POM as material ensures high reliability and durability of the markers under industrial conditions.