This product is a cable marker from manufacturer Ses-Sterling, type Pliosnap+ PS-06 9 white, specifically developed for cable identification in installation technology. These markers enable clear identification of cables and wires to prevent errors during installation, maintenance, or repair. The marking is achieved by a black print of the number 9 on a white carrier, which spans the cable outer diameter of 2.6 to 3.5 mm. The markers are made of POM (polyoxymethylene), a thermoplastic polymer known for its high strength, abrasion resistance, and chemical resistance, making it suitable for industrial and technical environments.

Applications
The PS-06 9 white marker is designed for cables with an outer diameter between 2.6 mm and 3.5 mm, corresponding to a cable cross-section of 1 to 1.5 mm². This range covers typical wiring in electrical installations, such as control lines, signal or data cables in buildings, machines, or plants. The marking is secured via a simple yet reliable clamp mechanism that encloses the cable and ensures a firm attachment. The white color of the marker provides good contrast against the black print, improving readability even under low lighting conditions.

Functions and Equipment in Detail
The markers are supplied as pre-loaded carrier strips, with one packaging unit containing 10 carrier strips, each holding 30 markers (total 300 markers). The carrier strips themselves are red, but the color of the carrier strips is not part of the marking function; it serves storage and handling purposes. The markers themselves are made of POM, a material offering high mechanical strength, resistance to wear, and resistance to many chemicals. The marking is done by a permanent, non-washable black print of the number 9, which remains clearly legible even under mechanical stress or over time.

Technology Explained Simply
The design of the Pliosnap+ PS-06 is based on a clamp mechanism that allows the marker to be easily and quickly placed around the cable without requiring additional tools or adhesives. The POM material ensures that the marker retains its shape even under mechanical stress, such as bending or pulling, and does not break. The dimensions of the marker are designed to securely fit cables with an outer diameter of 2.6 to 3.5 mm, without being too loose or tearing. The white color with black print ensures clear visibility and is standard in electrical and installation technology.

Compatibility and Accessories
The PS-06 9 white marker is specifically designed for cables with an outer diameter of 2.6 to 3.5 mm and a cross-section of 1 to 1.5 mm². It is therefore compatible with standard wiring used in electrical installations, such as those found in residential and commercial buildings, machine construction, or automation technology. The markers can be combined with other markers from the Pliosnap+ series to ensure a uniform labeling system. The carrier strips are red, but the color of the carrier strips is not part of the marking function; it serves storage and handling purposes.

Installation and Mounting
Installation is done by simply placing the marker around the cable and engaging the clamp mechanism. No additional tools or adhesives are required. The markers can be easily applied, even in tight or hard-to-reach areas, due to their elastic fit. The attachment is permanent and resistant to mechanical stress, ensuring long-term identification.

Operational Advantages
Using Pliosnap+ PS-06 9 white markers enables quick and unambiguous cable identification, increasing work efficiency during installations, maintenance, or repairs. The high-quality POM material ensures long service life and resistance to wear, chemicals, and mechanical stress. The clear marking with the number 9 in black on white ensures high readability, even under difficult conditions. The delivery in pre-loaded carrier strips simplifies storage and use, as the markers are pre-prepared and ready for immediate application.