General
Colour	Yellow

Identification rings of the brand Ses-Sterling, type Pliotex PT-V+ 45 6 yellow, are used for the clear identification of cables in electrical and IT installations. The rings are made of soft PVC and are available in yellow colour with black printing of the marking "15,2 cm ( 6 inch ). They are designed for use with cables having an outer diameter of 2.2 to 5.0 mm, corresponding to a cable cross-section of 1 to 6 mm². Identification is achieved through the pre-cut shape of the rings, which can be directly slid onto the cable without requiring additional tools or adhesives.

Identification rings are a standard tool in electrical and data cabling, used to clearly identify cables during installation, in enclosures or in server rooms. The colour yellow and the black print "15,2 cm ( 6 inch ) enable clear visual differentiation, especially in environments with high cable density. The use of soft PVC ensures flexible and stable adaptation to the cable surface without damaging it.

Functions and equipment in detail
The rings are supplied as individual rings in bags, with the packaging unit containing 100 pieces. The pre-cut shape allows for quick and easy installation, as no additional tools such as scissors or knives are required. The marking "15,2 cm ( 6 inch ) is clearly legible and serves as a visual reference to uniquely identify the cable in the system. The choice of soft PVC material provides good resistance to mechanical stress and minor environmental influences, as typically encountered in indoor installations.

Technology explained simply
Soft PVC is a flexible plastic material that adapts well to the cable surface and ensures a secure fit. The pre-cut shape of the rings allows for quick installation, as they can simply be slipped over the cable and positioned at the desired location. The yellow colour and black print "15,2 cm ( 6 inch ) ensure high readability, even under low lighting conditions. The rings are not designed for outdoor use or in damp environments, as no specific protection rating such as IP67 is specified.

Compatibility and accessories
The identification rings are designed for cables with an outer diameter of 2.2 to 5.0 mm, corresponding to a cross-section of 1 to 6 mm². They are therefore suitable for a wide range of conductors in electrical installations, such as in enclosures, control systems or IT infrastructures. The rings are not connected to additional accessories such as label holders, printers or labelling systems; they serve as an independent identification solution.

Installation and mounting
Mounting is done by simply sliding the ring over the cable. Due to the pre-cut shape, no additional processing is required. The rings fit securely without damaging the cable and can be removed if necessary. Installation does not require any special tools or aids. The marking is immediately readable after installation and remains stable throughout the service life.

Advantages in operation
The use of identification rings simplifies maintenance and fault diagnosis in electrical and IT systems. The clear, coloured marking with the number "15,2 cm ( 6 inch ) allows for quick identification of the cable, increasing work speed and reducing error sources. The material quality ensures long durability under normal indoor conditions. The pre-cut shape and easy installation reduce the effort required during installation and maintenance.

The rings are available in a packaging unit of 100 pieces, suitable for larger projects or series installations. The packaging is designed for professional use, with individual rings supplied in bags to prevent contamination and damage. The weight per piece (0.06 g) is provided for logistical planning but is not relevant for the user in operation.