General
Colour	Yellow

Identification rings of the PLIOTEX-VPLUS series, type PT-V+ 45 2 in yellow colour, are manufactured by Ses-Sterling and serve for the unambiguous identification of cables in the field of electrical and IT installation. The rings are made of soft PVC and feature a black print with the marking "5,1 cm ( 2 inch ). They are specifically designed for cables with an outer diameter between 2.2 mm and 5.0 mm, corresponding to a cable cross-section of 1 to 6 mm². The yellow colour enables quick visual differentiation in the cable harness, especially in complex installations where clear assignment of lines is required.

Identification rings are a standard tool in electrical engineering for clearly marking cables, lines or connections. The PLIOTEX-VPLUS series is characterised by high flexibility and durability, achieved through the use of soft PVC. This material ensures easy installation, as the rings can be elastically fitted around the cable without damaging it. The yellow colour is frequently assigned in industrial environments to specific functions or systems, such as control lines or auxiliary power supplies, making the rings easily identifiable in the cable run.

Functions and equipment in detail
Identification rings PT-V+ 45 2 are pre-cut and packaged individually, enabling quick and precise installation. The black print "5,1 cm ( 2 inch ) ensures clear, abrasion-resistant labelling that remains legible even after frequent handling or in dirty environments. The rings are designed for cables with an outer diameter of 2.2 to 5.0 mm, ensuring broad applicability in electrical installation. The specified fit for cable cross-sections of 1 to 6 mm² covers most common wire cross-sections in building and industrial technology.

Technology explained simply
The use of soft PVC as material ensures high elasticity and shape stability. The rings can be easily slid over the cable and secure themselves to the cable due to their shape and material strength. The yellow colour is often reserved in technical environments for specific systems or functions, facilitating orientation in the cable harness. The black print "5,1 cm ( 2 inch ) is permanent and resistant to mechanical stress, ensuring long-term usability.

Compatibility and accessories
The rings are specifically designed for cables with an outer diameter of 2.2 to 5.0 mm and thus fit a wide range of cable types used in electrical and IT installation. They are not connected to special tools or additional components; installation is done manually. The packaging contains 100 individual rings delivered in bags, enabling orderly storage and easy retrieval.

Installation and mounting
Mounting is done by simply sliding the ring over the cable. Due to the flexibility of the soft PVC material, no additional tool support is required. The rings secure themselves automatically on the cable once slid over the end and placed at the desired position. Use occurs directly during the installation process, without additional preparation or mounting aids.

Advantages in operation
The identification rings provide clear, durable and abrasion-resistant labelling that remains legible even after prolonged use. The yellow colour enables quick visual identification, especially in complex systems. The use of soft PVC ensures easy handling and prevents cable damage. The pre-cut individual rings simplify work and reduce installation time.